Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch

Tran Hoang Vu

doi:doi:10.11648/j.jeee.20160403.15

| Peer-Reviewed

Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch

Tran Hoang Vu

Published in Journal of Electrical and Electronic Engineering (Volume 4, Issue 3)

Received: 18 May 2016 Accepted: 1 June 2016 Published: 17 June 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.

Published in	Journal of Electrical and Electronic Engineering (Volume 4, Issue 3)
DOI	10.11648/j.jeee.20160403.15
Page(s)	68-72
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

OpenFlow Switch, NetFPGA, Wakeup On Lan, Delay Time, Data Center Network, Green Networking

References

[1]	Growth in data center electricity use 2005 to 2010, http://www.analyticspress.com/datacenters.html
[2]	M. Gupta, “A feasibility study for power management in lan switches,” in Proceedings of the 12^th IEEE International Conference on Network Protocols, 2004.
[3]	Eugene Shih, Paramvir Bahl, Michael J. Sinclair, “Wake on wireless: An Event Driven Energy Saving Strategy for Battery Operated Devices.”
[4]	“IEEE 802. 1 X Wake in LAN Support” Authentication Services Configuration Guide Cisco IOS Release 15 MT.
[5]	“Magic Packet Technology” White paper, combinations thereof are trademarks of Advanced Micro Devices.
[6]	M. Gupta and S. Singh, “Dynamic ethernet link shutdown for energy conservation on ethernet links,” in IEEE International Conference on Communications, 2007.
[7]	C. Gunaratne, K. Christensen, B. Nordman, and S. Suen, “Reducing the energy consumption of ethernet with adaptive link rate (alr),” IEEE Transactions on Computers, vol. 57, pp. 448–461, 2008.
[8]	S. Nedevschi, L. Popa, G. Iannaccone, S. Ratnasamy, and D. Wetherall, “Reducing network energy consumption via sleeping and rate-adaptation,” in Proc. of NSDI, Berkeley, CA, USA: USENIX Association, pp. 323–336, 2008.
[9]	T. H. Vu, V. C. Luc, N. T. Quan, T. Thanh, N. H. Thanh, P. N. Nam “Design Sleep mode and Wakeup method for OpenFlow Switches” in Journal of Low Power Electronics, Vol. Number 3, pp. 347-353, September 2014.
[10]	T. H. Vu, T. Thanh, V. Q. Trong, N. H. Thanh, P. N. Nam “Energy Saving for OpenFlow Switch on the NetFPGA platform Using Multi-Frequency” in International Journal of Computing and Network Technology, No. 1, pp. 9-15, 1 Jan 2014.
[11]	Dongwook Kim “Gigabit Media Independent Interface – Gigabit Ethernet Nework” Feb, 28 2014.
[12]	Glen Gibb, John W. Lockwood, Jad Naous, Paul Hartke, and Nick McKeown “NetFPGA – An Open Platform for Teaching How to Build Gigabit-rate Network Switches and Routers” IEEE Transactions on Education, 2008.
[13]	http://netfpga.org/10G_specs.html

Cite This Article

Plain Text BibTeX RIS

APA Style

Tran Hoang Vu. (2016). Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. Journal of Electrical and Electronic Engineering, 4(3), 68-72. https://doi.org/10.11648/j.jeee.20160403.15

Copy | Download

ACS Style

Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J. Electr. Electron. Eng. 2016, 4(3), 68-72. doi: 10.11648/j.jeee.20160403.15

Copy | Download

AMA Style

Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J Electr Electron Eng. 2016;4(3):68-72. doi: 10.11648/j.jeee.20160403.15

Copy | Download

@article{10.11648/j.jeee.20160403.15,
  author = {Tran Hoang Vu},
  title = {Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {4},
  number = {3},
  pages = {68-72},
  doi = {10.11648/j.jeee.20160403.15},
  url = {https://doi.org/10.11648/j.jeee.20160403.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20160403.15},
  abstract = {Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch
AU  - Tran Hoang Vu
Y1  - 2016/06/17
PY  - 2016
N1  - https://doi.org/10.11648/j.jeee.20160403.15
DO  - 10.11648/j.jeee.20160403.15
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 68
EP  - 72
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20160403.15
AB  - Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Tran Hoang Vu

Danang College of Technology, The University of Danang, Danang, Vietnam

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Tran Hoang Vu. (2016). Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. Journal of Electrical and Electronic Engineering, 4(3), 68-72. https://doi.org/10.11648/j.jeee.20160403.15

Copy | Download

ACS Style

Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J. Electr. Electron. Eng. 2016, 4(3), 68-72. doi: 10.11648/j.jeee.20160403.15

Copy | Download

AMA Style

Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J Electr Electron Eng. 2016;4(3):68-72. doi: 10.11648/j.jeee.20160403.15

Copy | Download

@article{10.11648/j.jeee.20160403.15,
  author = {Tran Hoang Vu},
  title = {Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {4},
  number = {3},
  pages = {68-72},
  doi = {10.11648/j.jeee.20160403.15},
  url = {https://doi.org/10.11648/j.jeee.20160403.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20160403.15},
  abstract = {Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch
AU  - Tran Hoang Vu
Y1  - 2016/06/17
PY  - 2016
N1  - https://doi.org/10.11648/j.jeee.20160403.15
DO  - 10.11648/j.jeee.20160403.15
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 68
EP  - 72
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20160403.15
AB  - Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.
VL  - 4
IS  - 3
ER  -

Copy | Download