Design and Thermal Behavior Analysis of a Plan Air Solar Collector

Salmwende Eloi Tiendrebeogo; Tubreoumya Guy Christian; Kafando Guetinsom Jean; Nana Bernard; Kere Moumini; Dissa Alfa Oumar; Koulidiati Jean; Bere Antoine

doi:doi:10.11648/j.sjee.20221001.11

Design and Thermal Behavior Analysis of a Plan Air Solar Collector

Salmwende Eloi Tiendrebeogo, Tubreoumya Guy Christian, Kafando Guetinsom Jean, Nana Bernard, Kere Moumini, Dissa Alfa Oumar, Koulidiati Jean, Bere Antoine

Published in Science Journal of Energy Engineering (Volume 10, Issue 1)

Received: 8 January 2022 Accepted: 25 January 2022 Published: 16 February 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In order to find heat production techniques for drying and heating applications of premises in tropical climates from process characterization studies, a flat air collector with air and forced convection was first designed. A simulation of solar radiation, thermal behavior of the solar collector and an experimental test of the latter were carried for validation. The time profiles of the evolution of solar radiation and the temperatures of the heat transfer fluid at the inlet and outlet of the collector as well as those of the collector components during a day were presented, November 17th, 2019. During this day, for an ambient air temperature at the collector inlet varying between 20°C and 41°C, the experimental temperatures of the absorber and solar collector outlet air temperature are respectively 96°C and 78°C for maximum measured solar irradiation of the order of 900 W/m². For the same interval of variation of ambient air temperature, the simulated temperatures of the absorber and of the solar collector outlet air are respectively of the order of 105°C and 90°C when the simulated maximum solar irradiation attains 880 W/m² of collection at true solar noon. The values of R2 obtained for the data of the solar radiation, collector outlet air temperature and temperatures of the absorber are respectively of the order of 0.960, 0.98 and 0.950, indicating a good correlation between the experimental and predicted data; whereas the root mean square error (RMSE) are respectively around 0.020, 0.013 and 0.011, showing a very good match between experimental and modelled temperatures. The temperature range at the outlet of the present device which is simple and achievable at low cost is important for the drying needs of the various products and heating.

Published in	Science Journal of Energy Engineering (Volume 10, Issue 1)
DOI	10.11648/j.sjee.20221001.11
Page(s)	1-7
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Design, Solar Collector, Radiation, Temperature, Simulation, Experience

References

[1]	Plan national de développement économique et social (PNDES) 2016 2020, pp. 88, Burkina Faso, 2016.
[2]	N. K. Edem, B. BAMBARA, M. GAYE, Etude de marche solaire thermique: “production d’eau chaude et de séchage des produits agricole au Burkina Faso,” Ouagadougou, pp. 64, 2015, https://docplayer.fr/21109513-Burkina-faso-soltrain-afrique-de-l-ouestl.html.
[3]	S. E. Tiendrebeogo, A. O Dissa, F. Cherblanc, I. Youm, J. C. Bénet, A. Compaoré, J. Koulidiati, “Characterization of Two Different Stumps of Spirulina platensis Drying: Assessment of Water Transport Coefficient,” Food and Nutrition Sciences, Vol 6, pp. 1437-1449, 2015, http://dx.doi.org/10.4236/fns.2015.615148.
[4]	A. O Dissa, “Séchage convectif de la mangue: analyse de l’influence des paramètres aérauliques et intrinsèques, conception et modélisation du fonctionnement d’un séchoir solaire indirect,” University of Ouagadougou No. d'ordre: 2007 / 048, pp 312, 2007.
[5]	I. G. Adamu, H. U. Kabri, I. D. Hussaini and A. D. Mada, “Design and construction of fish smoking kiln,” Journal of Engineering and Technology Research, Vol. 5 (1), pp. 15-20, 2013, DOI: 10.5897/JETR-12-042.
[6]	T. Khaled, A. Khelifa, L. Boutina, I. Tabet, and S. Haddad, “Theoretical Study and Experimental Validation of Energetic Performances of Photovoltaic/Thermal Air Collector. International Journal of Photoenergy, Vol. 2018, pp. 10, 2018, https://doi.org/10.1155/2018/2794068.
[7]	V. Shemelin and T. Matuska, “Performance Modelling of Dual Air/Water Collector in Solar Water and Space Heating Application,” International Journal of Photoenergy, Vol. 2019, pp. 10, 2019, https://doi.org/10.1155/2019/8560193.
[8]	A. Idlimam, A. Lamharrar, C. S. E. Kane, S. Akkad et M. Kouhila, “Etude expérimentale de la cinétique de séchage de l’écorce de grenadine dans un séchoir partiellement solaire en convection force,” Revue des Energies Renouvelables, CER’07 Oujda pp. 237–240, 2007.
[9]	S. O. Amrouche and N. Benaouda, “Système de régulation d’un séchoir solaire pour plantes aromatiques et médicinales,” Revue des Energies Renouvelables, SMSTS’08 Alger, pp. 221-228, 2008.
[10]	J. R. Puiggali and F. Penot, “Analyse du comportement dynamique et thermique d’un séchoir solaire constitué d’un capteur à matrice poreuse couplé à une cheminée solaire,” Revue de Physique Appliquee, Vol. 18 (10), pp. 625-633, 1983, http://dx.doi.org/10.1051/rphysap:019830018010062500.
[11]	J. O. Almirón, M. A. Lara, “Experimental Development of Solar Collector of Unconventional Air,” Sustainable Energy, Vol. 4, No. 1, 17-27, 2016, http://dx.doi.org/10.12691/rse-4-1-3.
[12]	N. M. Maundu, K. S. Kiptoo, K. Eliud, D. Kindole and Y. Nakajo, “Air-flow Distribution Study and Performance Analysis of a Natural Convection Solar Dryer,” American Journal of Energy Research, Vol. 5, N°1, pp. 12-22, 2017, http://dx.doi.org/10.12691/ajer-5-1-2.
[13]	J. Yang, Q. Jiang, J. Hou and C. Luo, “A Study on Thermal Performance of a Novel All-Glass Evacuated Tube Solar Collector Manifold Header with an Inserted Tube,” International Journal of Photoenergy, pp 7, Article ID 409517, 2015, http://dx.doi.org/10.1155/2015/409517.
[14]	Monsurat Bello, Matthew Olusola Oluwamukomi* and Victor N, “Enujuigha. Modeling of the adsorption isotherm of Pleurotus ostreatus using Guggenheim-Anderson-de Boer (GAB) equation,” Journal of Engineering and Technology Research 11 (4): 41-46, 2019, http://dx.doi.org/10.5897/JETR2017.0626.
[15]	A. COMPAORE, “Etude énergétique d’un séchoir solaire hybride solaire-gaz: applications au séchage de l’oignon,” Violet de Galmi”. Thèse de doctorat, Université Ouaga 1, 156 p, ISBN 13: 978-620-2-28291-8, 2016.

Cite This Article

Plain Text BibTeX RIS

APA Style

Salmwende Eloi Tiendrebeogo, Tubreoumya Guy Christian, Kafando Guetinsom Jean, Nana Bernard, Kere Moumini, et al. (2022). Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Science Journal of Energy Engineering, 10(1), 1-7. https://doi.org/10.11648/j.sjee.20221001.11

Copy | Download

ACS Style

Salmwende Eloi Tiendrebeogo; Tubreoumya Guy Christian; Kafando Guetinsom Jean; Nana Bernard; Kere Moumini, et al. Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Sci. J. Energy Eng. 2022, 10(1), 1-7. doi: 10.11648/j.sjee.20221001.11

Copy | Download

AMA Style

Salmwende Eloi Tiendrebeogo, Tubreoumya Guy Christian, Kafando Guetinsom Jean, Nana Bernard, Kere Moumini, et al. Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Sci J Energy Eng. 2022;10(1):1-7. doi: 10.11648/j.sjee.20221001.11

Copy | Download

@article{10.11648/j.sjee.20221001.11,
  author = {Salmwende Eloi Tiendrebeogo and Tubreoumya Guy Christian and Kafando Guetinsom Jean and Nana Bernard and Kere Moumini and Dissa Alfa Oumar and Koulidiati Jean and Bere Antoine},
  title = {Design and Thermal Behavior Analysis of a Plan Air Solar Collector},
  journal = {Science Journal of Energy Engineering},
  volume = {10},
  number = {1},
  pages = {1-7},
  doi = {10.11648/j.sjee.20221001.11},
  url = {https://doi.org/10.11648/j.sjee.20221001.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20221001.11},
  abstract = {In order to find heat production techniques for drying and heating applications of premises in tropical climates from process characterization studies, a flat air collector with air and forced convection was first designed. A simulation of solar radiation, thermal behavior of the solar collector and an experimental test of the latter were carried for validation. The time profiles of the evolution of solar radiation and the temperatures of the heat transfer fluid at the inlet and outlet of the collector as well as those of the collector components during a day were presented, November 17th, 2019. During this day, for an ambient air temperature at the collector inlet varying between 20°C and 41°C, the experimental temperatures of the absorber and solar collector outlet air temperature are respectively 96°C and 78°C for maximum measured solar irradiation of the order of 900 W/m2. For the same interval of variation of ambient air temperature, the simulated temperatures of the absorber and of the solar collector outlet air are respectively of the order of 105°C and 90°C when the simulated maximum solar irradiation attains 880 W/m2 of collection at true solar noon. The values of R2 obtained for the data of the solar radiation, collector outlet air temperature and temperatures of the absorber are respectively of the order of 0.960, 0.98 and 0.950, indicating a good correlation between the experimental and predicted data; whereas the root mean square error (RMSE) are respectively around 0.020, 0.013 and 0.011, showing a very good match between experimental and modelled temperatures. The temperature range at the outlet of the present device which is simple and achievable at low cost is important for the drying needs of the various products and heating.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Design and Thermal Behavior Analysis of a Plan Air Solar Collector
AU  - Salmwende Eloi Tiendrebeogo
AU  - Tubreoumya Guy Christian
AU  - Kafando Guetinsom Jean
AU  - Nana Bernard
AU  - Kere Moumini
AU  - Dissa Alfa Oumar
AU  - Koulidiati Jean
AU  - Bere Antoine
Y1  - 2022/02/16
PY  - 2022
N1  - https://doi.org/10.11648/j.sjee.20221001.11
DO  - 10.11648/j.sjee.20221001.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 1
EP  - 7
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20221001.11
AB  - In order to find heat production techniques for drying and heating applications of premises in tropical climates from process characterization studies, a flat air collector with air and forced convection was first designed. A simulation of solar radiation, thermal behavior of the solar collector and an experimental test of the latter were carried for validation. The time profiles of the evolution of solar radiation and the temperatures of the heat transfer fluid at the inlet and outlet of the collector as well as those of the collector components during a day were presented, November 17th, 2019. During this day, for an ambient air temperature at the collector inlet varying between 20°C and 41°C, the experimental temperatures of the absorber and solar collector outlet air temperature are respectively 96°C and 78°C for maximum measured solar irradiation of the order of 900 W/m2. For the same interval of variation of ambient air temperature, the simulated temperatures of the absorber and of the solar collector outlet air are respectively of the order of 105°C and 90°C when the simulated maximum solar irradiation attains 880 W/m2 of collection at true solar noon. The values of R2 obtained for the data of the solar radiation, collector outlet air temperature and temperatures of the absorber are respectively of the order of 0.960, 0.98 and 0.950, indicating a good correlation between the experimental and predicted data; whereas the root mean square error (RMSE) are respectively around 0.020, 0.013 and 0.011, showing a very good match between experimental and modelled temperatures. The temperature range at the outlet of the present device which is simple and achievable at low cost is important for the drying needs of the various products and heating.
VL  - 10
IS  - 1
ER  -

Copy | Download

Author Information

Salmwende Eloi Tiendrebeogo

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Tubreoumya Guy Christian

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Kafando Guetinsom Jean

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Nana Bernard

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Kere Moumini

Environment Department, Ecole Normale Supérieure (ENS), Ouagadougou, Burkina Faso
Dissa Alfa Oumar

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Koulidiati Jean

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso
Bere Antoine

Environmental Physics and Chemistry Laboratory (LPCE), University of Joseph KI - ZERBO, Ouagadougou, Burkina Faso

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Salmwende Eloi Tiendrebeogo, Tubreoumya Guy Christian, Kafando Guetinsom Jean, Nana Bernard, Kere Moumini, et al. (2022). Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Science Journal of Energy Engineering, 10(1), 1-7. https://doi.org/10.11648/j.sjee.20221001.11

Copy | Download

ACS Style

Salmwende Eloi Tiendrebeogo; Tubreoumya Guy Christian; Kafando Guetinsom Jean; Nana Bernard; Kere Moumini, et al. Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Sci. J. Energy Eng. 2022, 10(1), 1-7. doi: 10.11648/j.sjee.20221001.11

Copy | Download

AMA Style

Salmwende Eloi Tiendrebeogo, Tubreoumya Guy Christian, Kafando Guetinsom Jean, Nana Bernard, Kere Moumini, et al. Design and Thermal Behavior Analysis of a Plan Air Solar Collector. Sci J Energy Eng. 2022;10(1):1-7. doi: 10.11648/j.sjee.20221001.11

Copy | Download

@article{10.11648/j.sjee.20221001.11,
  author = {Salmwende Eloi Tiendrebeogo and Tubreoumya Guy Christian and Kafando Guetinsom Jean and Nana Bernard and Kere Moumini and Dissa Alfa Oumar and Koulidiati Jean and Bere Antoine},
  title = {Design and Thermal Behavior Analysis of a Plan Air Solar Collector},
  journal = {Science Journal of Energy Engineering},
  volume = {10},
  number = {1},
  pages = {1-7},
  doi = {10.11648/j.sjee.20221001.11},
  url = {https://doi.org/10.11648/j.sjee.20221001.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20221001.11},
  abstract = {In order to find heat production techniques for drying and heating applications of premises in tropical climates from process characterization studies, a flat air collector with air and forced convection was first designed. A simulation of solar radiation, thermal behavior of the solar collector and an experimental test of the latter were carried for validation. The time profiles of the evolution of solar radiation and the temperatures of the heat transfer fluid at the inlet and outlet of the collector as well as those of the collector components during a day were presented, November 17th, 2019. During this day, for an ambient air temperature at the collector inlet varying between 20°C and 41°C, the experimental temperatures of the absorber and solar collector outlet air temperature are respectively 96°C and 78°C for maximum measured solar irradiation of the order of 900 W/m2. For the same interval of variation of ambient air temperature, the simulated temperatures of the absorber and of the solar collector outlet air are respectively of the order of 105°C and 90°C when the simulated maximum solar irradiation attains 880 W/m2 of collection at true solar noon. The values of R2 obtained for the data of the solar radiation, collector outlet air temperature and temperatures of the absorber are respectively of the order of 0.960, 0.98 and 0.950, indicating a good correlation between the experimental and predicted data; whereas the root mean square error (RMSE) are respectively around 0.020, 0.013 and 0.011, showing a very good match between experimental and modelled temperatures. The temperature range at the outlet of the present device which is simple and achievable at low cost is important for the drying needs of the various products and heating.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Design and Thermal Behavior Analysis of a Plan Air Solar Collector
AU  - Salmwende Eloi Tiendrebeogo
AU  - Tubreoumya Guy Christian
AU  - Kafando Guetinsom Jean
AU  - Nana Bernard
AU  - Kere Moumini
AU  - Dissa Alfa Oumar
AU  - Koulidiati Jean
AU  - Bere Antoine
Y1  - 2022/02/16
PY  - 2022
N1  - https://doi.org/10.11648/j.sjee.20221001.11
DO  - 10.11648/j.sjee.20221001.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 1
EP  - 7
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20221001.11
AB  - In order to find heat production techniques for drying and heating applications of premises in tropical climates from process characterization studies, a flat air collector with air and forced convection was first designed. A simulation of solar radiation, thermal behavior of the solar collector and an experimental test of the latter were carried for validation. The time profiles of the evolution of solar radiation and the temperatures of the heat transfer fluid at the inlet and outlet of the collector as well as those of the collector components during a day were presented, November 17th, 2019. During this day, for an ambient air temperature at the collector inlet varying between 20°C and 41°C, the experimental temperatures of the absorber and solar collector outlet air temperature are respectively 96°C and 78°C for maximum measured solar irradiation of the order of 900 W/m2. For the same interval of variation of ambient air temperature, the simulated temperatures of the absorber and of the solar collector outlet air are respectively of the order of 105°C and 90°C when the simulated maximum solar irradiation attains 880 W/m2 of collection at true solar noon. The values of R2 obtained for the data of the solar radiation, collector outlet air temperature and temperatures of the absorber are respectively of the order of 0.960, 0.98 and 0.950, indicating a good correlation between the experimental and predicted data; whereas the root mean square error (RMSE) are respectively around 0.020, 0.013 and 0.011, showing a very good match between experimental and modelled temperatures. The temperature range at the outlet of the present device which is simple and achievable at low cost is important for the drying needs of the various products and heating.
VL  - 10
IS  - 1
ER  -

Copy | Download