Research Of Carbon Fibre Absorbing Material Based On Impedance Matching

Yehua Li; Daqing Huang; Shan He; Hongfei Cheng; Youqiang Shi

doi:doi:10.11648/j.sd.20160405.22

| Peer-Reviewed

Research Of Carbon Fibre Absorbing Material Based On Impedance Matching

Yehua Li, Daqing Huang, Shan He, Hongfei Cheng, Youqiang Shi

Published in Science Discovery (Volume 4, Issue 5)

Received: 4 November 2016 Published: 5 November 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The carbon fibre has a good characteristic of electrical conductivity. When cut short and dispersed, it reacts as electric dipole or harmonic oscillator to radar wave. This paper blends the short carbon fibre with ethoxyline resin, and makes films by spraying the blend on prepreg which made by glass fibre and resin, then measures the EM parameters with the free-space method, and designs the low reflectivity absorbing material from 8GHz to 18GHz by matching impedance and calculating the reflectivity of multilayer films. Adjusting the kinds and quantities of matching layers can shift the absorbing frequency bands, and become better absorbing respective in X-band and Ku-band. The absorbing material samples are made by vacuumizing and heating method, and their reflectivity correspond to the designed result. The designing method and absorbing material made in this paper can be referred in engineering application.

Published in	Science Discovery (Volume 4, Issue 5)
DOI	10.11648/j.sd.20160405.22
Page(s)	324-329
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Short Carbon Fiber, Free-Space Method, Impedance Matching

References

[1]	田森. 复杂涂覆目标高频电磁散射特性研究[D].南京：南京航空航天大学，2011。
[2]	沈福贵，逯贵祯，梁晶晶. 宽带结构吸波材料特性研究[J].微波学报：2012，（S3）：423-426。
[3]	何燕飞，龚荣洲，李享成，王鲜，何华辉. 多层复合吸波材料的制备及其吸波性能[J]. 无机材料学报，2006，21（6）：1450-1453。
[4]	赵东林, 高云雷，沈曾民.螺旋形碳纤维结构吸波材料的制备及其吸波性能研究[J].功能材料信息，2011，8(4)：17-21。
[5]	刘辉，高云雷，赵东林，迟伟东，沈曾民. 镀镍中间相沥青基碳纤维的吸波性能[J].EMC材料应用，2011，（5）：9-12。
[6]	王雯. 碳基复合吸波材料的制备及性能研究[D].济南：山东大学，2012：89-90。
[7]	周勇. 镀镍碳纤维/环氧树脂复合材料的制备及吸波性能研究[D].武汉：武汉理工大学，2011：27-32。
[8]	Zou T C, Shi C S, Zhao N Q. Microwave absorbing properties of activated carbon-fiber felt dipole array/epoxy resin composites[J]. Journal of Materials Science, 2007, 42(13):4870-4876.
[9]	邹田春,赵乃勤,师春生. 活性碳纤维/树脂复合吸波材料的设计[J].功能材料与器件学报，2007，13(1)：54-58。
[10]	谢炜,程海峰,楚增勇,陈朝辉,周永江. 以中空多孔碳纤维为主体的轻质吸波材料吸波性能研究[J].无机材料学报，2009，24（2）：320-324。
[11]	Zhao N Q, Zou T C, Shi C S, Li J J, Guo W W. Microwave absorbing properties of activated carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites [J]. Materials Science and Engineering B, 2006, 127(2):207-211.
[12]	贺龙辉，胡照文，邓联文，黄生祥，刘胜，贺君，文瑞. 宽频高性能短切碳纤维/聚氨酯泡沫吸波材料制备[J].功能材料，2015，23（46）：23120-23123。
[13]	齐宇，黄大庆，何山.多层复合吸波涂料设计与试验研究[J].航空材料学报：2010，30（2）：89-93。
[14]	马成勇，程海峰，唐耿平，等.三层雷达吸波涂层的吸波性能研究[J].材料工程：2008，（1）：11-13。
[15]	赵冉.炭黑/碳纤维树脂基复合吸波材料性能研究[D].海口：海南大学，2012：35-39。
[16]	吴红焕.短切碳纤维和炭黑的介电性能研究[D].西安：西北工业大学，2007：25-34。
[17]	郭伟凯. 碳纤维排布方式对结构吸波材料吸波性能的影响及其机理分析[D].天津:天津大学：20-47。
[18]	张伟，苏东林，齐万泉. 基于自由空间法的复合材料电磁参数测量[J].复合材料学报，2007，24（1）：141-145。
[19]	何山，李业华，周淳.一种多层胶板雷达吸波材料[J].航空材料学报，2016，36（4）：41-46。

Cite This Article

Plain Text BibTeX RIS

APA Style

Yehua Li, Daqing Huang, Shan He, Hongfei Cheng, Youqiang Shi. (2016). Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Science Discovery, 4(5), 324-329. https://doi.org/10.11648/j.sd.20160405.22

Copy | Download

ACS Style

Yehua Li; Daqing Huang; Shan He; Hongfei Cheng; Youqiang Shi. Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Sci. Discov. 2016, 4(5), 324-329. doi: 10.11648/j.sd.20160405.22

Copy | Download

AMA Style

Yehua Li, Daqing Huang, Shan He, Hongfei Cheng, Youqiang Shi. Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Sci Discov. 2016;4(5):324-329. doi: 10.11648/j.sd.20160405.22

Copy | Download

@article{10.11648/j.sd.20160405.22,
  author = {Yehua Li and Daqing Huang and Shan He and Hongfei Cheng and Youqiang Shi},
  title = {Research Of Carbon Fibre Absorbing Material Based On Impedance Matching},
  journal = {Science Discovery},
  volume = {4},
  number = {5},
  pages = {324-329},
  doi = {10.11648/j.sd.20160405.22},
  url = {https://doi.org/10.11648/j.sd.20160405.22},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160405.22},
  abstract = {The carbon fibre has a good characteristic of electrical conductivity. When cut short and dispersed, it reacts as electric dipole or harmonic oscillator to radar wave. This paper blends the short carbon fibre with ethoxyline resin, and makes films by spraying the blend on prepreg which made by glass fibre and resin, then measures the EM parameters with the free-space method, and designs the low reflectivity absorbing material from 8GHz to 18GHz by matching impedance and calculating the reflectivity of multilayer films. Adjusting the kinds and quantities of matching layers can shift the absorbing frequency bands, and become better absorbing respective in X-band and Ku-band. The absorbing material samples are made by vacuumizing and heating method, and their reflectivity correspond to the designed result. The designing method and absorbing material made in this paper can be referred in engineering application.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Research Of Carbon Fibre Absorbing Material Based On Impedance Matching
AU  - Yehua Li
AU  - Daqing Huang
AU  - Shan He
AU  - Hongfei Cheng
AU  - Youqiang Shi
Y1  - 2016/11/05
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160405.22
DO  - 10.11648/j.sd.20160405.22
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 324
EP  - 329
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160405.22
AB  - The carbon fibre has a good characteristic of electrical conductivity. When cut short and dispersed, it reacts as electric dipole or harmonic oscillator to radar wave. This paper blends the short carbon fibre with ethoxyline resin, and makes films by spraying the blend on prepreg which made by glass fibre and resin, then measures the EM parameters with the free-space method, and designs the low reflectivity absorbing material from 8GHz to 18GHz by matching impedance and calculating the reflectivity of multilayer films. Adjusting the kinds and quantities of matching layers can shift the absorbing frequency bands, and become better absorbing respective in X-band and Ku-band. The absorbing material samples are made by vacuumizing and heating method, and their reflectivity correspond to the designed result. The designing method and absorbing material made in this paper can be referred in engineering application.
VL  - 4
IS  - 5
ER  -

Copy | Download

Author Information

Yehua Li

Beijing Institute of Aeronautical Material, Beijing, China
Daqing Huang

Beijing Institute of Aeronautical Material, Beijing, China
Shan He

Beijing Institute of Aeronautical Material, Beijing, China
Hongfei Cheng

Beijing Institute of Aeronautical Material, Beijing, China
Youqiang Shi

Beijing Institute of Aeronautical Material, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yehua Li, Daqing Huang, Shan He, Hongfei Cheng, Youqiang Shi. (2016). Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Science Discovery, 4(5), 324-329. https://doi.org/10.11648/j.sd.20160405.22

Copy | Download

ACS Style

Yehua Li; Daqing Huang; Shan He; Hongfei Cheng; Youqiang Shi. Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Sci. Discov. 2016, 4(5), 324-329. doi: 10.11648/j.sd.20160405.22

Copy | Download

AMA Style

Yehua Li, Daqing Huang, Shan He, Hongfei Cheng, Youqiang Shi. Research Of Carbon Fibre Absorbing Material Based On Impedance Matching. Sci Discov. 2016;4(5):324-329. doi: 10.11648/j.sd.20160405.22

Copy | Download

@article{10.11648/j.sd.20160405.22,
  author = {Yehua Li and Daqing Huang and Shan He and Hongfei Cheng and Youqiang Shi},
  title = {Research Of Carbon Fibre Absorbing Material Based On Impedance Matching},
  journal = {Science Discovery},
  volume = {4},
  number = {5},
  pages = {324-329},
  doi = {10.11648/j.sd.20160405.22},
  url = {https://doi.org/10.11648/j.sd.20160405.22},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160405.22},
  abstract = {The carbon fibre has a good characteristic of electrical conductivity. When cut short and dispersed, it reacts as electric dipole or harmonic oscillator to radar wave. This paper blends the short carbon fibre with ethoxyline resin, and makes films by spraying the blend on prepreg which made by glass fibre and resin, then measures the EM parameters with the free-space method, and designs the low reflectivity absorbing material from 8GHz to 18GHz by matching impedance and calculating the reflectivity of multilayer films. Adjusting the kinds and quantities of matching layers can shift the absorbing frequency bands, and become better absorbing respective in X-band and Ku-band. The absorbing material samples are made by vacuumizing and heating method, and their reflectivity correspond to the designed result. The designing method and absorbing material made in this paper can be referred in engineering application.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Research Of Carbon Fibre Absorbing Material Based On Impedance Matching
AU  - Yehua Li
AU  - Daqing Huang
AU  - Shan He
AU  - Hongfei Cheng
AU  - Youqiang Shi
Y1  - 2016/11/05
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160405.22
DO  - 10.11648/j.sd.20160405.22
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 324
EP  - 329
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160405.22
AB  - The carbon fibre has a good characteristic of electrical conductivity. When cut short and dispersed, it reacts as electric dipole or harmonic oscillator to radar wave. This paper blends the short carbon fibre with ethoxyline resin, and makes films by spraying the blend on prepreg which made by glass fibre and resin, then measures the EM parameters with the free-space method, and designs the low reflectivity absorbing material from 8GHz to 18GHz by matching impedance and calculating the reflectivity of multilayer films. Adjusting the kinds and quantities of matching layers can shift the absorbing frequency bands, and become better absorbing respective in X-band and Ku-band. The absorbing material samples are made by vacuumizing and heating method, and their reflectivity correspond to the designed result. The designing method and absorbing material made in this paper can be referred in engineering application.
VL  - 4
IS  - 5
ER  -

Copy | Download