A New Method for Analyzing the Dimension Error of Marine Steel Structures

Meng Linghe; Zhang Shijian; Xiao Liquan; Wang Xuelian; Yang Zilong; Wang Zhihong

doi:doi:10.11648/j.ogce.20190701.16

| Peer-Reviewed

A New Method for Analyzing the Dimension Error of Marine Steel Structures

Meng Linghe, Zhang Shijian, Xiao Liquan, Wang Xuelian, Yang Zilong, Wang Zhihong

Published in International Journal of Oil, Gas and Coal Engineering (Volume 7, Issue 1)

Received: 10 October 2018 Accepted: 23 January 2019 Published: 15 February 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.

Published in	International Journal of Oil, Gas and Coal Engineering (Volume 7, Issue 1)
DOI	10.11648/j.ogce.20190701.16
Page(s)	33-39
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Least Squares Coordinate Fitting, Design Data, Measured Data, Three-Dimensional Precision

References

[1]	Yin Yongqiang, Dong Chao, Wang Jianxi, Wen Hailong. Discussion on the size control of marine steel structure construction process [C]. The 13th China Association for Science and Technology Annual Meeting Ocean Engineering Equipment Development Forum and 2011 Ocean Engineering Academic Annual Meeting Proceedings, 2012, 349-354.
[2]	Steel structure engineering construction specifications [S]. GB50755-2012.
[3]	Yang Yiwei. Discussion on Quality Control of Steel Structure Factory in Construction [J]. Commodity & Quality: Architecture & Development. 2012 (6): 74-74.
[4]	Engineering Measurement Specification [S]. GB50026-2007.
[5]	Lin Yuxiang. Control measurement [M], 2006.
[6]	Lai Jinfu, Yang Rui. Discussion on key technology of measurement of first-level control network of bridge engineering [J]. People's Yangtze River. 2015 (14): 73-93.
[7]	Cheng Zhengfeng, Song Weidong. Control measurement. Principles and methods of digital mapping., 2009.
[8]	Jin Yun. The layout of large bridge elevation control network. Urban road bridge and flood control [M].2009.
[9]	Liu Wengu, Zhang Weifu, You Yangsheng. Surveying [M]. 2018.
[10]	Department of Measurement and Adjustment, Wuhan University. Measurement Adjustment Foundation. 2007.
[11]	Department of Mathematics, Tongji University. Advanced Mathematics. 2007.
[12]	Tao Benzao, Qiu Weining, Huang Gana. Error Theory and Measurement Adjustment Foundation [M]. Wuhan: Wuhan University Press, 2003: 102-148.
[13]	Zhang Shijian, Liu Chunjie. A New Method for Accurate Measurement of Steel Pile Span of Jacket Frame [J], 2014, 26 (5): 92-95.
[14]	Liu Chunjie, Zhang Shijian. A method for detecting the overall size of jackets [J]. Surveying Engineering, 2014, 23 (2): 39-44.
[15]	Liu Chunjie, Zhang Shijian, Sun Yunhu. Method for detecting the spatial position of circular members of jackets in three-dimensional coordinate system [P], ZL201010115279.X. November 28, 2012.
[16]	Wu Bin, Ding Wen, Yang Fengting, Xue Ting. Research on Error Analysis Technology of Coordinate Measuring System for Non-orthogonal Axis Total Station [J]. Journal of Metrology. 2017, 06.

Cite This Article

Plain Text BibTeX RIS

APA Style

Meng Linghe, Zhang Shijian, Xiao Liquan, Wang Xuelian, Yang Zilong, et al. (2019). A New Method for Analyzing the Dimension Error of Marine Steel Structures. International Journal of Oil, Gas and Coal Engineering, 7(1), 33-39. https://doi.org/10.11648/j.ogce.20190701.16

Copy | Download

ACS Style

Meng Linghe; Zhang Shijian; Xiao Liquan; Wang Xuelian; Yang Zilong, et al. A New Method for Analyzing the Dimension Error of Marine Steel Structures. Int. J. Oil Gas Coal Eng. 2019, 7(1), 33-39. doi: 10.11648/j.ogce.20190701.16

Copy | Download

AMA Style

Meng Linghe, Zhang Shijian, Xiao Liquan, Wang Xuelian, Yang Zilong, et al. A New Method for Analyzing the Dimension Error of Marine Steel Structures. Int J Oil Gas Coal Eng. 2019;7(1):33-39. doi: 10.11648/j.ogce.20190701.16

Copy | Download

@article{10.11648/j.ogce.20190701.16,
  author = {Meng Linghe and Zhang Shijian and Xiao Liquan and Wang Xuelian and Yang Zilong and Wang Zhihong},
  title = {A New Method for Analyzing the Dimension Error of Marine Steel Structures},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {7},
  number = {1},
  pages = {33-39},
  doi = {10.11648/j.ogce.20190701.16},
  url = {https://doi.org/10.11648/j.ogce.20190701.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20190701.16},
  abstract = {With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - A New Method for Analyzing the Dimension Error of Marine Steel Structures
AU  - Meng Linghe
AU  - Zhang Shijian
AU  - Xiao Liquan
AU  - Wang Xuelian
AU  - Yang Zilong
AU  - Wang Zhihong
Y1  - 2019/02/15
PY  - 2019
N1  - https://doi.org/10.11648/j.ogce.20190701.16
DO  - 10.11648/j.ogce.20190701.16
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 33
EP  - 39
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20190701.16
AB  - With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.
VL  - 7
IS  - 1
ER  -

Copy | Download

Author Information

Meng Linghe

Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Zhang Shijian

Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Xiao Liquan

Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Wang Xuelian

Tianjin Ruiyang Offshore Engineering Co., Ltd., Tianjin, China
Yang Zilong

Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Wang Zhihong

Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Meng Linghe, Zhang Shijian, Xiao Liquan, Wang Xuelian, Yang Zilong, et al. (2019). A New Method for Analyzing the Dimension Error of Marine Steel Structures. International Journal of Oil, Gas and Coal Engineering, 7(1), 33-39. https://doi.org/10.11648/j.ogce.20190701.16

Copy | Download

ACS Style

Meng Linghe; Zhang Shijian; Xiao Liquan; Wang Xuelian; Yang Zilong, et al. A New Method for Analyzing the Dimension Error of Marine Steel Structures. Int. J. Oil Gas Coal Eng. 2019, 7(1), 33-39. doi: 10.11648/j.ogce.20190701.16

Copy | Download

AMA Style

Meng Linghe, Zhang Shijian, Xiao Liquan, Wang Xuelian, Yang Zilong, et al. A New Method for Analyzing the Dimension Error of Marine Steel Structures. Int J Oil Gas Coal Eng. 2019;7(1):33-39. doi: 10.11648/j.ogce.20190701.16

Copy | Download

@article{10.11648/j.ogce.20190701.16,
  author = {Meng Linghe and Zhang Shijian and Xiao Liquan and Wang Xuelian and Yang Zilong and Wang Zhihong},
  title = {A New Method for Analyzing the Dimension Error of Marine Steel Structures},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {7},
  number = {1},
  pages = {33-39},
  doi = {10.11648/j.ogce.20190701.16},
  url = {https://doi.org/10.11648/j.ogce.20190701.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20190701.16},
  abstract = {With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - A New Method for Analyzing the Dimension Error of Marine Steel Structures
AU  - Meng Linghe
AU  - Zhang Shijian
AU  - Xiao Liquan
AU  - Wang Xuelian
AU  - Yang Zilong
AU  - Wang Zhihong
Y1  - 2019/02/15
PY  - 2019
N1  - https://doi.org/10.11648/j.ogce.20190701.16
DO  - 10.11648/j.ogce.20190701.16
T2  - International Journal of Oil, Gas and Coal Engineering
JF  - International Journal of Oil, Gas and Coal Engineering
JO  - International Journal of Oil, Gas and Coal Engineering
SP  - 33
EP  - 39
PB  - Science Publishing Group
SN  - 2376-7677
UR  - https://doi.org/10.11648/j.ogce.20190701.16
AB  - With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.
VL  - 7
IS  - 1
ER  -

Copy | Download