This study aims to adapt and evaluate an updraft biomass gasifier stove using sawdust biomass. It was a cylindrical gasifier having a diameter of 32.5cm*40cm height and a rectangular box-like base that served as a set and had a primary air hole of 20cm*6cm sliding type door. Fuels made from renewable biomass might easily take the place of fossil fuels in a variety of energy-using applications with favorable environmental effects. Gasification is a method of converting biomass energy into a fuel that potentially replace fossil fuels in the production of high-efficiency electricity. The future of energy is looking promising for biomass energy as one of the most important renewable energy sources. This work has been carried out to adapt, construct, and test an applicable biomass gasifier stove. This is for producing producer gas from locally available biomass fuel. The gasifier was constructed and tested on Water Boiling Test (WBT). The test was run using sawdust as feeding fuel. Various factors, including primary and secondary air inlets, operation, fuel type, and manufacturing materials and techniques, were presented and assessed. The updraft gasifier stove was evaluated at a biomass feeding rate of 0.5kg per batch. The results obtained from this study show a combustion efficiency of 84.2% and a thermal efficiency of 30.6% respectively. Therefore, the outcome could offer contemporary energy services for necessities and useful uses.
| Published in | International Journal of Sustainable and Green Energy (Volume 12, Issue 2) |
| DOI | 10.11648/j.ijrse.20231202.12 |
| Page(s) | 21-28 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Ash, Biomass Fuels, Construction, Fuel Efficiency, Gasification, Updraft Gasifier
| [1] | I. Ruiz-Mercado, O. Masera, H. Zamora, and K. R. Smith, “Adoption and sustained use of improved cookstoves,” Energy Policy, vol. 39, no. 12, pp. 7557–7566, 2011, doi: 10.1016/j.enpol.2011.03.028. |
| [2] | C. Birzer et al., “An analysis of combustion from a top-lit up-draft (TLUD) cookstove,” J. Humanit. Eng., vol. 2, no. 1, 1970, doi: 10.36479/jhe.v2i1.11. |
| [3] | E. E. Ekanem et al., “This item was submitted to Loughborough’s Institutional Repository (https://dspace.lboro.ac.uk/) by the author and is made available under the following Creative Commons Licence conditions. For the full text of this licence, please go to : Developmen,” pp. 2–3. |
| [4] | M. P. Kshirsagar and V. R. Kalamkar, “A comprehensive review on biomass cookstoves and a systematic approach for modern cookstove design,” Renew. Sustain. Energy Rev., vol. 30, no. May 2022, pp. 580–603, 2014, doi: 10.1016/j.rser.2013.10.039. |
| [5] | L. G. Hassan, N. A. Sani, A. Sokoto, and U. G. Tukur, “Comparative Studies of Burning Rates and Water Boiling Time of Wood Charcoal and Briquettes Produced from Carbonized Martynia annua woody Shells,” Niger. J. Basic Appl. Sci., vol. 25, no. 2, p. 21, 2018, doi: 10.4314/njbas.v25i2.4. |
| [6] | J. J. Jetter, P. Kariher, A. Geraghty, P. O. Box, and N. Carolina, “Stoves_Paper_Final_Color_2.26.09,” vol. 33, pp. 294–305, 2009. |
| [7] | K. R. Smith and S. Mehta, “The burden of disease from indoor air pollution in developing countries: comparison of estimates,” Int. J. Hyg. Environ. Health, vol. 206, no. 4, pp. 279–289, 2003, doi: https://doi.org/10.1078/1438-4639-00224. |
| [8] | B. Asamoah, J. Nikiema, S. Gebrezgabher, E. Odonkor, and M. Njenga, RESOURCE RECOVERY & REUSE SERIES 7 A Review on Production, Marketing and Use of Fuel Briquettes. 2016. |
| [9] | J. Hafner et al., “A quantitative performance assessment of improved cooking stoves and traditional three-stone-fire stoves using a two-pot test design in Chamwino, Dodoma, Tanzania,” Environ. Res. Lett., vol. 13, no. 2, 2018, doi: 10.1088/1748-9326/aa9da3. |
| [10] | A. F. Pasha, M. A. Ali, H. Roy, and M. M. Rahman, “Designing a modified Tchar stove and evaluation of its thermal performance,” Clean. Chem. Eng., vol. 5, p. 100096, 2023, doi: https://doi.org/10.1016/j.clce.2023.100096. |
| [11] | H. Kumar and N. L. Panwar, “Experimental investigation on energy-efficient twin-mode biomass improved cookstove,” SN Appl. Sci., vol. 1, no. 7, pp. 1–8, 2019, doi: 10.1007/s42452-019-0804-x. |
| [12] | P. Mckendry, “Energy production from biomass (part 1): overview of biomass,” vol. 83, no. July 2001, pp. 37–46, 2002. |
| [13] | O. O. Demirbas and H. Demirkan, “Learning styles of design students and the relationship of academic performance and gender in design education Learning styles of design students and the relationship of academic performance and gender in design education,” no. February 2018, 2007, doi: 10.1016/j.learninstruc.2007.02.007. |
| [14] | E. Winijkul and T. C. Bond, “Emissions from residential combustion considering end-uses and spatial constraints: Part II, emission reduction scenarios,” Atmos. Environ., vol. 124, pp. 1–11, 2016, doi: https://doi.org/10.1016/j.atmosenv.2015.10.011. |
| [15] | O. Isaac, E. Ige, and I. O. Yunus, “Design and Performance Evaluation of Energy Efficient Biomass Gasifier Cook Stove Using Multi Fuels Design and Performance Evaluation of Energy Efficient Biomass Gasifier Cook Stove Using Multi Fuels,” no. October, 2019, doi: 10.9734/jenrr/2019/v3i430103. |
| [16] | S. J. Ojolo, J. I. Orisaleye, and S. O. Ismail, “Development of an inverted downdraft biomass gasifier cookstove. Development of an Inverted Downdraft Biomass Gasifier Cookstove Corresponding Author : J. I. Orisaleye,” no. January, 2012. |
| [17] | A. Gulilat, T. Wedajo, and A. Gulilat, “Stove Testing Result A Report on Controlled Cooking Test of Gonzie Stove,” 2014. |
| [18] | A. B. Demie, G. H. wondimagegn, and S. Abubeker, “Fabrication and Performance Evaluation of Small Scale Wood Gas Stove for House Hold Purpose Using Water Boiling Test Method,” Int. J. Sci. Res. Publ., vol. 9, no. 11, p. p9587, 2019, doi: 10.29322/ijsrp.9.11.2019.p9587. |
| [19] | T. Tesfaye Mengesha, “Performance Evaluation of Pyrolysis Cookstove Using Water Boiling Test,” Am. J. Mod. Phys., vol. 6, no. 5, p. 108, 2017, doi: 10.11648/j.ajmp.20170605.15. |
| [20] | Sabrina Khan, Tania Hossain, Md.Mominur Rahman, 2016. Development of portable Rocket stove and performance evaluation. International journal of Enginering and technology, volume: 03 issue 12, Dec 2016. |
APA Style
Duresa Tesfaye, Gemechis Midaksa, Usman Kedir. (2023). Adaptation and Performance Evaluation of Updraft Biomass Gasifier Stove with Sawdust as Fuel. International Journal of Sustainable and Green Energy, 12(2), 21-28. https://doi.org/10.11648/j.ijrse.20231202.12
ACS Style
Duresa Tesfaye; Gemechis Midaksa; Usman Kedir. Adaptation and Performance Evaluation of Updraft Biomass Gasifier Stove with Sawdust as Fuel. Int. J. Sustain. Green Energy 2023, 12(2), 21-28. doi: 10.11648/j.ijrse.20231202.12
AMA Style
Duresa Tesfaye, Gemechis Midaksa, Usman Kedir. Adaptation and Performance Evaluation of Updraft Biomass Gasifier Stove with Sawdust as Fuel. Int J Sustain Green Energy. 2023;12(2):21-28. doi: 10.11648/j.ijrse.20231202.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijrse.20231202.12,
author = {Duresa Tesfaye and Gemechis Midaksa and Usman Kedir},
title = {Adaptation and Performance Evaluation of Updraft Biomass Gasifier Stove with Sawdust as Fuel},
journal = {International Journal of Sustainable and Green Energy},
volume = {12},
number = {2},
pages = {21-28},
doi = {10.11648/j.ijrse.20231202.12},
url = {https://doi.org/10.11648/j.ijrse.20231202.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20231202.12},
abstract = {This study aims to adapt and evaluate an updraft biomass gasifier stove using sawdust biomass. It was a cylindrical gasifier having a diameter of 32.5cm*40cm height and a rectangular box-like base that served as a set and had a primary air hole of 20cm*6cm sliding type door. Fuels made from renewable biomass might easily take the place of fossil fuels in a variety of energy-using applications with favorable environmental effects. Gasification is a method of converting biomass energy into a fuel that potentially replace fossil fuels in the production of high-efficiency electricity. The future of energy is looking promising for biomass energy as one of the most important renewable energy sources. This work has been carried out to adapt, construct, and test an applicable biomass gasifier stove. This is for producing producer gas from locally available biomass fuel. The gasifier was constructed and tested on Water Boiling Test (WBT). The test was run using sawdust as feeding fuel. Various factors, including primary and secondary air inlets, operation, fuel type, and manufacturing materials and techniques, were presented and assessed. The updraft gasifier stove was evaluated at a biomass feeding rate of 0.5kg per batch. The results obtained from this study show a combustion efficiency of 84.2% and a thermal efficiency of 30.6% respectively. Therefore, the outcome could offer contemporary energy services for necessities and useful uses.},
year = {2023}
}
TY - JOUR T1 - Adaptation and Performance Evaluation of Updraft Biomass Gasifier Stove with Sawdust as Fuel AU - Duresa Tesfaye AU - Gemechis Midaksa AU - Usman Kedir Y1 - 2023/07/21 PY - 2023 N1 - https://doi.org/10.11648/j.ijrse.20231202.12 DO - 10.11648/j.ijrse.20231202.12 T2 - International Journal of Sustainable and Green Energy JF - International Journal of Sustainable and Green Energy JO - International Journal of Sustainable and Green Energy SP - 21 EP - 28 PB - Science Publishing Group SN - 2575-1549 UR - https://doi.org/10.11648/j.ijrse.20231202.12 AB - This study aims to adapt and evaluate an updraft biomass gasifier stove using sawdust biomass. It was a cylindrical gasifier having a diameter of 32.5cm*40cm height and a rectangular box-like base that served as a set and had a primary air hole of 20cm*6cm sliding type door. Fuels made from renewable biomass might easily take the place of fossil fuels in a variety of energy-using applications with favorable environmental effects. Gasification is a method of converting biomass energy into a fuel that potentially replace fossil fuels in the production of high-efficiency electricity. The future of energy is looking promising for biomass energy as one of the most important renewable energy sources. This work has been carried out to adapt, construct, and test an applicable biomass gasifier stove. This is for producing producer gas from locally available biomass fuel. The gasifier was constructed and tested on Water Boiling Test (WBT). The test was run using sawdust as feeding fuel. Various factors, including primary and secondary air inlets, operation, fuel type, and manufacturing materials and techniques, were presented and assessed. The updraft gasifier stove was evaluated at a biomass feeding rate of 0.5kg per batch. The results obtained from this study show a combustion efficiency of 84.2% and a thermal efficiency of 30.6% respectively. Therefore, the outcome could offer contemporary energy services for necessities and useful uses. VL - 12 IS - 2 ER -
Email: