Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure

Serigne Thiao; Awa Mar; Omar Drame; Diouma Kobor; Issakha Youm

doi:doi:10.11648/j.ijrse.20221104.12

| Peer-Reviewed

Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure

Serigne Thiao, Awa Mar, Omar Drame, Diouma Kobor, Issakha Youm

Published in International Journal of Sustainable and Green Energy (Volume 11, Issue 4)

Received: 14 November 2022 Accepted: 29 November 2022 Published: 15 December 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Solar thermal collectors are the key component of active solar cooling/heating systems. This article presents a theoretical study to evaluate the effects of optical parameters such as the transmission coefficient of the glass on the outlet temperature of heat transfer fluid. We have therefore developed a detailed model for flat plate solar collectors where a detailed analysis of the effects of parameters such as glass cover thickness and transmission coefficient will be analyzed. To simplify our study, we have considered an area of flat solar collector approximately equal to 1m². A numerical procedure is implemented to obtain the solution for the nonlinear set of equations representing the mathematical model. A computational fluid dynamic program with ANSYS is adapted to simulate the outlet temperatures of the heat transfer fluid as function of the glass cover thickness and the optical parameters. The effects of the glass cover thickness and optical parameters such as transmission coefficients on the outlet temperatures of the heat transfer fluid are analyzed. The results obtained show that the optimal thickness and the optimal transmission coefficient of the glass are respectively 6 mm and 0.9. We have also shown that for good resistance to pressure, the optical transmission coefficient must be equal to 0.9. The outlet temperature of the heat transfer fluid can reach 75°C, therefore able to meet our drying and solar heating needs.

Published in	International Journal of Sustainable and Green Energy (Volume 11, Issue 4)
DOI	10.11648/j.ijrse.20221104.12
Page(s)	75-83
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Fluid Dynamic, Glass Cover Thickness, Optical Parameters, Solar Flat-Plate

References

[1]	Nurril Ikmal Shamsul Azha et al. (2020). Thermal Performance Enhancement in Flat Plate Solar Collector Solar Water Heater: A Review, Processes 2020, 8, 756; doi: 10.3390/pr8070756.
[2]	W. M. Hasan et al., 2018, Case study on solar water heating for ﬂat plate collector, Case Studies in Thermal Engineering 12 (2018) 666-671.
[3]	M. Ameri, H. Farzan, M. Nobari, 2021. Evaluation of Different Glazing Materials, Strategies, and Configurations in Flat Plate Collectors Using Glass and Acrylic Covers: An Experimental Assessment, 12 (4), pp. 297-306. Doi: 10.5829/ijee.2021.12.04.01.
[4]	Ramadhani B. et al. 2014, Effect of Glass Thickness on Performance of Flat Plate Solar Collectors for Fruits Drying, Journal of Energy, Volume 2014, Article ID 247287, 8 pages http://dx.doi.org/10.1155/2014/247287.
[5]	Fabio Struckmann, 2008, Analysis of a Flat-plate Solar Collector, Project Report 2008 MVK160 Heat and Mass Transport May 08, 2008, Lund, Sweden.
[6]	Rostami, S.; Abd Hamid, A. S.; Sopian, K.; Jarimi, H.; Bassim, A.; Ibrahim, A. Heat Transfer Analysis of the Flat Plate Solar Thermal Collectors with Elliptical and Circular Serpentine Tubes. Appl. Sci. 2022, 12, 4519. https://doi.org/10.3390/app12094519
[7]	R. Dobriyal, P. Negi, N. Sengar et al., A brief review on solar flat plate collector by incorporating the effect of nanofluid, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.11.294
[8]	Gholamabbas Sadeghi et al. Progress of experimental studies on compact integrated solar collector-storage retrofits adopting phase change materials. Solar Energy, Volume 237, 1 May 2022, Pages 62-95.
[9]	Alicja Siuta-Olcha, Tomasz Cholewa, Kinga Dopieralska-Howoruszko, (2020). Experimental studies of thermal performance of an evacuated tube heat pipe solar collector in Polish climatic conditions, Environmental Science and Pollution Research (2021) 28: 14319–14328, https://doi.org/10.1007/s11356-020-07920-3.
[10]	Adel A. Ghoneim et al., (2016), Performance Analysis of Evacuated Tube Collector in Hot Climate, European International Journal of Science and Technology, ISSN: 2304-9693, Vol. 5 No. 3.
[11]	Bhowmik, H. and Amin, R., 2017, Efficiency improvement of flat plate solar collector using reflector, Energy Reports, Volume 3, November 2017, Pages 119-123.
[12]	Malleboyena mastanaiah, k. Hemachandrareddy, performance characteristics of solar thermal flat plate collector with different selective surface coatings and heat transfer fluids, international journal of mechanical engineering and technology, 8 (4), 2017, pp. 309-318.
[13]	B Kalidasan, R Shankar, T Srinivas (2016) Absorber Tube with Internal Pin-Fins for Solar Parabolic Trough Collector, MATEC Web of Conferences 55, 06004 (2016) DOI: 10.1051/matecconf/20165506004 ACPEE 2016.
[14]	B. Kalidasan and T. Srinivas (2014) study on effect of number of transparent covers and refractive index on performance of solar water heater, journal of renewable energy, volume 2014, article id 757618, 11 pages http://dx.doi.org/10.1155/2014/757618
[15]	Federico Giovannetti et al. (2012). High transmittance, low emissivity glass covers for flat plate collectors: Applications and performance, Energy Procedia 30 (2012) 106-115.
[16]	H. Vettrivel and P. Mathiazhagan (2017), Comparison Study of Solar Flat Plate Collector with Single and Double Glazing Systems, International journal of renewable energy research, vol. 7, no. 1, 2017.
[17]	X. Zhao, Z. Wang, Q. Tang. Theoretical Investigation of the Performance of a Novel Loop Heat Pipe Solar Water Heating System for Use in Beijing, China, Applied Thermal Engineering (2010), doi: 10.1016/j.applthermaleng.2010.07.002.
[18]	Adsten, M. (2002), Solar Thermal Collectors at High Latitudes Design and Performance of Non-Tracking Concentrators, Environmental Science, Physics, 2002.
[19]	S. THIAO, C. Mbow and I. Youm, 2014. Heat Transfer Analysis of a Flat-plate Solar Collector Running a Solid Adsorption Refrigerator. Research Journal of Applied Sciences, Engineering and Technology, 7 (19): 4130-4136.
[20]	Thiao, S., Mar, A., Mbow, C., Youm, I., Solar Cooling System: Theoretical Study of Coefficient of Performance (COP) of a Solar Chiller Adsorption in the Site of CERER, (2014) International Journal on Energy Conversion (IRECON), 2 (5), pp. 147-150.
[21]	A. Mar, C. Mbow, S. Thiao, I. Youm: Theoretical study of a Parabolic Trough solar collector: Influences of atmospheric parameters. International Journal of Energy, Environment, and Economics, 22 (5), 461-473, 2014.
[22]	Imran Nazir Unar et al. Performance evaluation of solar flat plate collector using different working fluids through computational fluid dynamics. SN Applied Sciences (2020) 2: 209 \| https://doi.org/10.1007/s42452-020-2005-z.
[23]	Baniamerian, Z.; Mehdipour, R.; Kargar, F. A numerical investigation on aerodynamic coefficients of solar troughs considering terrain effects and vortex shedding. Int. J. Eng. Trans. C Asp. 2015, 28, 940–948.
[24]	Sara Rostami et al. Exergy Optimization of a Solar Collector in Flat Plate Shape Equipped with Elliptical Pipes Filled with Turbulent Nanofluid Flow: A Study for Thermal Management. Water 2020, 12, 2294; doi: 10.3390/w12082294.
[25]	ANSYS Fluent-Solver Theory Guide; Release 14.0; ANSYS Inc.: Canonsburg, PA, USA, 2011; pp. 351–353. 41.
[26]	Bejan, A. Convection Heat Transfer; Wiley-Interscience: Hoboken, NJ, USA, 1984).
[27]	Rosseland Radiation Model Theory. Available online: https://www.afs.enea.it/project/neptunius/docs/ﬂuent/html/th/node113.htm (accessed on 12 January 2018). Release 12.0 © ANSYS, Inc. 2009-01-29.

Cite This Article

Plain Text BibTeX RIS

APA Style

Serigne Thiao, Awa Mar, Omar Drame, Diouma Kobor, Issakha Youm. (2022). Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. International Journal of Sustainable and Green Energy, 11(4), 75-83. https://doi.org/10.11648/j.ijrse.20221104.12

Copy | Download

ACS Style

Serigne Thiao; Awa Mar; Omar Drame; Diouma Kobor; Issakha Youm. Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. Int. J. Sustain. Green Energy 2022, 11(4), 75-83. doi: 10.11648/j.ijrse.20221104.12

Copy | Download

AMA Style

Serigne Thiao, Awa Mar, Omar Drame, Diouma Kobor, Issakha Youm. Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. Int J Sustain Green Energy. 2022;11(4):75-83. doi: 10.11648/j.ijrse.20221104.12

Copy | Download

@article{10.11648/j.ijrse.20221104.12,
  author = {Serigne Thiao and Awa Mar and Omar Drame and Diouma Kobor and Issakha Youm},
  title = {Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {11},
  number = {4},
  pages = {75-83},
  doi = {10.11648/j.ijrse.20221104.12},
  url = {https://doi.org/10.11648/j.ijrse.20221104.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20221104.12},
  abstract = {Solar thermal collectors are the key component of active solar cooling/heating systems. This article presents a theoretical study to evaluate the effects of optical parameters such as the transmission coefficient of the glass on the outlet temperature of heat transfer fluid. We have therefore developed a detailed model for flat plate solar collectors where a detailed analysis of the effects of parameters such as glass cover thickness and transmission coefficient will be analyzed. To simplify our study, we have considered an area of flat solar collector approximately equal to 1m2. A numerical procedure is implemented to obtain the solution for the nonlinear set of equations representing the mathematical model. A computational fluid dynamic program with ANSYS is adapted to simulate the outlet temperatures of the heat transfer fluid as function of the glass cover thickness and the optical parameters. The effects of the glass cover thickness and optical parameters such as transmission coefficients on the outlet temperatures of the heat transfer fluid are analyzed. The results obtained show that the optimal thickness and the optimal transmission coefficient of the glass are respectively 6 mm and 0.9. We have also shown that for good resistance to pressure, the optical transmission coefficient must be equal to 0.9. The outlet temperature of the heat transfer fluid can reach 75°C, therefore able to meet our drying and solar heating needs.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure
AU  - Serigne Thiao
AU  - Awa Mar
AU  - Omar Drame
AU  - Diouma Kobor
AU  - Issakha Youm
Y1  - 2022/12/15
PY  - 2022
N1  - https://doi.org/10.11648/j.ijrse.20221104.12
DO  - 10.11648/j.ijrse.20221104.12
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 75
EP  - 83
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20221104.12
AB  - Solar thermal collectors are the key component of active solar cooling/heating systems. This article presents a theoretical study to evaluate the effects of optical parameters such as the transmission coefficient of the glass on the outlet temperature of heat transfer fluid. We have therefore developed a detailed model for flat plate solar collectors where a detailed analysis of the effects of parameters such as glass cover thickness and transmission coefficient will be analyzed. To simplify our study, we have considered an area of flat solar collector approximately equal to 1m2. A numerical procedure is implemented to obtain the solution for the nonlinear set of equations representing the mathematical model. A computational fluid dynamic program with ANSYS is adapted to simulate the outlet temperatures of the heat transfer fluid as function of the glass cover thickness and the optical parameters. The effects of the glass cover thickness and optical parameters such as transmission coefficients on the outlet temperatures of the heat transfer fluid are analyzed. The results obtained show that the optimal thickness and the optimal transmission coefficient of the glass are respectively 6 mm and 0.9. We have also shown that for good resistance to pressure, the optical transmission coefficient must be equal to 0.9. The outlet temperature of the heat transfer fluid can reach 75°C, therefore able to meet our drying and solar heating needs.
VL  - 11
IS  - 4
ER  -

Copy | Download

Author Information

Serigne Thiao

Department of Physics, Unité de Formation et de Recherche des Sciences et Technologies, Assane Seck University of Ziguinchor, Ziguinchor, Senegal
Awa Mar

Departement of Physics, Ecole Supérieure des Sciences et Techniques de l’Ingénieur, Amadou Moktar MBOW University of Dakar, Dakar, Senegal
Omar Drame

Departement of Physics, Faculty of Science and Technology, Cheikh Anta Diop University of Dakar, Dakar-Fann, Senegal
Diouma Kobor

Department of Physics, Unité de Formation et de Recherche des Sciences et Technologies, Assane Seck University of Ziguinchor, Ziguinchor, Senegal
Issakha Youm

Departement of Physics, Faculty of Science and Technology, Cheikh Anta Diop University of Dakar, Dakar-Fann, Senegal

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Serigne Thiao, Awa Mar, Omar Drame, Diouma Kobor, Issakha Youm. (2022). Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. International Journal of Sustainable and Green Energy, 11(4), 75-83. https://doi.org/10.11648/j.ijrse.20221104.12

Copy | Download

ACS Style

Serigne Thiao; Awa Mar; Omar Drame; Diouma Kobor; Issakha Youm. Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. Int. J. Sustain. Green Energy 2022, 11(4), 75-83. doi: 10.11648/j.ijrse.20221104.12

Copy | Download

AMA Style

Serigne Thiao, Awa Mar, Omar Drame, Diouma Kobor, Issakha Youm. Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure. Int J Sustain Green Energy. 2022;11(4):75-83. doi: 10.11648/j.ijrse.20221104.12

Copy | Download

@article{10.11648/j.ijrse.20221104.12,
  author = {Serigne Thiao and Awa Mar and Omar Drame and Diouma Kobor and Issakha Youm},
  title = {Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {11},
  number = {4},
  pages = {75-83},
  doi = {10.11648/j.ijrse.20221104.12},
  url = {https://doi.org/10.11648/j.ijrse.20221104.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20221104.12},
  abstract = {Solar thermal collectors are the key component of active solar cooling/heating systems. This article presents a theoretical study to evaluate the effects of optical parameters such as the transmission coefficient of the glass on the outlet temperature of heat transfer fluid. We have therefore developed a detailed model for flat plate solar collectors where a detailed analysis of the effects of parameters such as glass cover thickness and transmission coefficient will be analyzed. To simplify our study, we have considered an area of flat solar collector approximately equal to 1m2. A numerical procedure is implemented to obtain the solution for the nonlinear set of equations representing the mathematical model. A computational fluid dynamic program with ANSYS is adapted to simulate the outlet temperatures of the heat transfer fluid as function of the glass cover thickness and the optical parameters. The effects of the glass cover thickness and optical parameters such as transmission coefficients on the outlet temperatures of the heat transfer fluid are analyzed. The results obtained show that the optimal thickness and the optimal transmission coefficient of the glass are respectively 6 mm and 0.9. We have also shown that for good resistance to pressure, the optical transmission coefficient must be equal to 0.9. The outlet temperature of the heat transfer fluid can reach 75°C, therefore able to meet our drying and solar heating needs.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Case Analysis of the Optical Parameters of Thermal Solar Flat-Plate Collector on Heat Fluid Transfer and Pressure
AU  - Serigne Thiao
AU  - Awa Mar
AU  - Omar Drame
AU  - Diouma Kobor
AU  - Issakha Youm
Y1  - 2022/12/15
PY  - 2022
N1  - https://doi.org/10.11648/j.ijrse.20221104.12
DO  - 10.11648/j.ijrse.20221104.12
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 75
EP  - 83
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20221104.12
AB  - Solar thermal collectors are the key component of active solar cooling/heating systems. This article presents a theoretical study to evaluate the effects of optical parameters such as the transmission coefficient of the glass on the outlet temperature of heat transfer fluid. We have therefore developed a detailed model for flat plate solar collectors where a detailed analysis of the effects of parameters such as glass cover thickness and transmission coefficient will be analyzed. To simplify our study, we have considered an area of flat solar collector approximately equal to 1m2. A numerical procedure is implemented to obtain the solution for the nonlinear set of equations representing the mathematical model. A computational fluid dynamic program with ANSYS is adapted to simulate the outlet temperatures of the heat transfer fluid as function of the glass cover thickness and the optical parameters. The effects of the glass cover thickness and optical parameters such as transmission coefficients on the outlet temperatures of the heat transfer fluid are analyzed. The results obtained show that the optimal thickness and the optimal transmission coefficient of the glass are respectively 6 mm and 0.9. We have also shown that for good resistance to pressure, the optical transmission coefficient must be equal to 0.9. The outlet temperature of the heat transfer fluid can reach 75°C, therefore able to meet our drying and solar heating needs.
VL  - 11
IS  - 4
ER  -

Copy | Download