Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design

Zohrab Melikyan; Taron Movsesyan

doi:doi:10.11648/j.ijmea.20170503.16

| Peer-Reviewed

Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design

Zohrab Melikyan, Taron Movsesyan

Published in International Journal of Mechanical Engineering and Applications (Volume 5, Issue 3)

Received: 24 March 2017 Accepted: 22 April 2017 Published: 1 June 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

At present closed and open loop geothermal heat pumps are in use. Nevertheless, they have disadvantages, which seriously limit their wide use. First disadvantage is the shortage of rather large free areas for laying underground heat exchangers in form of rather long pipelines. This problem arises especially in towns and large cities. Second disadvantage is the rather expensive and often not affordable construction of heating and cooling systems, sourced by heat pumps. For overcoming mentioned disadvantages and increasing energy efficiency and cost effectiveness of heating and cooling systems a new structure of heat pump and method for its calculation and design are suggested. Because the developed heat pump is able round year efficiently satisfying thermal needs for different purposes of a house it is called “universal heat pump”.

Published in	International Journal of Mechanical Engineering and Applications (Volume 5, Issue 3)
DOI	10.11648/j.ijmea.20170503.16
Page(s)	175-181
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Universal Heat Pump, Heating and Cooling, Energy Efficient, Complicated Structure of Geothermal Heat PUMP, SIMPLER

References

[1]	Karl Ochsner, Geothermal heat pumps: a guide for planning and installing. Earthscan, London, Sterling, VA, 2007, 164pp.
[2]	Zohrab Melikyan, Developing of heating and cooling local heat pump and method for design. Journal of Buildings and Sustainability. Vol.1, No.1, 2016, 47-55pp.
[3]	Melikyan, Z. A. Heating–Cooling of Buildings. Efficiency of Conventional and Renewable Technologies LAP Lambert Academic Publishing, Germany, 2012, 344 pages ISBN-978-3-8443-1939-2.
[4]	Melikyan, Z. A., Egnatosyan, S. M. (2015). Residential Buildings: Heating Loads. Encyclopedia of Energy Enginee¬ring and Technology, Second Edition. Taylor and Francis: New York, 1629-1636pp. Published online: 17 Jun. DOI: 10.1081/E-EEE2-120051988.
[5]	Egnatosyan, S. M. (2009). Hybrid System for Heating and Cooling of Houses with “Air to Air” Heat Pump and Heating Boiler. The 4th International Renewable and Clean Energy Conference Yerevan, p.41.
[6]	Wilson, Basu, ASHRAE Transaction Freon “R-134a” 1988.
[7]	V. F. Vasilev, U. V. Ivanova , I. I. Sukhanova: textbook СПбГАСУ. – СПб., 2010. – 72 p. ISBN 978-5-9227-0171.
[8]	Melikyan, Z. A., Ali Abd Elhaleem A. F. Assessment of a modiﬁed method for determining the cooling load of residential buildings. International Journal Elsevier V.35, 2010 England pp.4726-4730.
[9]	Marriott, M. J., Featherstone, R. E., Nalluri, C. 2009. Civil Engineering Hydraulics. 5th Edition, University of East London, J, Wiley & Sons, 424p. ISBN-10: 1405161957, ISBN-13: 978-1405161954.
[10]	Kopko, V. M. 2014. Heat supply and ventilation. 2nd edition, Publishing house “ACB”, Moscow, 336p, ISBN 978-5-93096-890-6.
[11]	Air Properties-Temperature, density, specific heat, ther¬mal conductivity, expansion coefficient, kinematic viscosity and Prandtl number” http://www.engineering toolbox.com /airproperties-d_156.html

Cite This Article

Plain Text BibTeX RIS

APA Style

Zohrab Melikyan, Taron Movsesyan. (2017). Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. International Journal of Mechanical Engineering and Applications, 5(3), 175-181. https://doi.org/10.11648/j.ijmea.20170503.16

Copy | Download

ACS Style

Zohrab Melikyan; Taron Movsesyan. Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. Int. J. Mech. Eng. Appl. 2017, 5(3), 175-181. doi: 10.11648/j.ijmea.20170503.16

Copy | Download

AMA Style

Zohrab Melikyan, Taron Movsesyan. Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. Int J Mech Eng Appl. 2017;5(3):175-181. doi: 10.11648/j.ijmea.20170503.16

Copy | Download

@article{10.11648/j.ijmea.20170503.16,
  author = {Zohrab Melikyan and Taron Movsesyan},
  title = {Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {3},
  pages = {175-181},
  doi = {10.11648/j.ijmea.20170503.16},
  url = {https://doi.org/10.11648/j.ijmea.20170503.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170503.16},
  abstract = {At present closed and open loop geothermal heat pumps are in use. Nevertheless, they have disadvantages, which seriously limit their wide use. First disadvantage is the shortage of rather large free areas for laying underground heat exchangers in form of rather long pipelines. This problem arises especially in towns and large cities. Second disadvantage is the rather expensive and often not affordable construction of heating and cooling systems, sourced by heat pumps. For overcoming mentioned disadvantages and increasing energy efficiency and cost effectiveness of heating and cooling systems a new structure of heat pump and method for its calculation and design are suggested. Because the developed heat pump is able round year efficiently satisfying thermal needs for different purposes of a house it is called “universal heat pump”.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design
AU  - Zohrab Melikyan
AU  - Taron Movsesyan
Y1  - 2017/06/01
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170503.16
DO  - 10.11648/j.ijmea.20170503.16
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 175
EP  - 181
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170503.16
AB  - At present closed and open loop geothermal heat pumps are in use. Nevertheless, they have disadvantages, which seriously limit their wide use. First disadvantage is the shortage of rather large free areas for laying underground heat exchangers in form of rather long pipelines. This problem arises especially in towns and large cities. Second disadvantage is the rather expensive and often not affordable construction of heating and cooling systems, sourced by heat pumps. For overcoming mentioned disadvantages and increasing energy efficiency and cost effectiveness of heating and cooling systems a new structure of heat pump and method for its calculation and design are suggested. Because the developed heat pump is able round year efficiently satisfying thermal needs for different purposes of a house it is called “universal heat pump”.
VL  - 5
IS  - 3
ER  -

Copy | Download

Author Information

Zohrab Melikyan

HVAC Department of National University of Architecture and Construction of Armenia, Yerevan, Armenia
Taron Movsesyan

HVAC Department of National University of Architecture and Construction of Armenia, Yerevan, Armenia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zohrab Melikyan, Taron Movsesyan. (2017). Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. International Journal of Mechanical Engineering and Applications, 5(3), 175-181. https://doi.org/10.11648/j.ijmea.20170503.16

Copy | Download

ACS Style

Zohrab Melikyan; Taron Movsesyan. Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. Int. J. Mech. Eng. Appl. 2017, 5(3), 175-181. doi: 10.11648/j.ijmea.20170503.16

Copy | Download

AMA Style

Zohrab Melikyan, Taron Movsesyan. Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design. Int J Mech Eng Appl. 2017;5(3):175-181. doi: 10.11648/j.ijmea.20170503.16

Copy | Download

@article{10.11648/j.ijmea.20170503.16,
  author = {Zohrab Melikyan and Taron Movsesyan},
  title = {Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {3},
  pages = {175-181},
  doi = {10.11648/j.ijmea.20170503.16},
  url = {https://doi.org/10.11648/j.ijmea.20170503.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170503.16},
  abstract = {At present closed and open loop geothermal heat pumps are in use. Nevertheless, they have disadvantages, which seriously limit their wide use. First disadvantage is the shortage of rather large free areas for laying underground heat exchangers in form of rather long pipelines. This problem arises especially in towns and large cities. Second disadvantage is the rather expensive and often not affordable construction of heating and cooling systems, sourced by heat pumps. For overcoming mentioned disadvantages and increasing energy efficiency and cost effectiveness of heating and cooling systems a new structure of heat pump and method for its calculation and design are suggested. Because the developed heat pump is able round year efficiently satisfying thermal needs for different purposes of a house it is called “universal heat pump”.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Developing of Heating and Cooling Universal System Sourced by New Type of Heat Pump and Method for Its Design
AU  - Zohrab Melikyan
AU  - Taron Movsesyan
Y1  - 2017/06/01
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170503.16
DO  - 10.11648/j.ijmea.20170503.16
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 175
EP  - 181
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170503.16
AB  - At present closed and open loop geothermal heat pumps are in use. Nevertheless, they have disadvantages, which seriously limit their wide use. First disadvantage is the shortage of rather large free areas for laying underground heat exchangers in form of rather long pipelines. This problem arises especially in towns and large cities. Second disadvantage is the rather expensive and often not affordable construction of heating and cooling systems, sourced by heat pumps. For overcoming mentioned disadvantages and increasing energy efficiency and cost effectiveness of heating and cooling systems a new structure of heat pump and method for its calculation and design are suggested. Because the developed heat pump is able round year efficiently satisfying thermal needs for different purposes of a house it is called “universal heat pump”.
VL  - 5
IS  - 3
ER  -

Copy | Download