Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM

Shuangxi Jing; Xiaoyu Yang; Chenxu Luo; Jinle Yuan; Zhipeng Luo

doi:doi:10.11648/j.ijmea.20170503.15

| Peer-Reviewed

Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM

Shuangxi Jing, Xiaoyu Yang, Chenxu Luo, Jinle Yuan, Zhipeng Luo

Published in International Journal of Mechanical Engineering and Applications (Volume 5, Issue 3)

Received: 1 April 2017 Accepted: 13 April 2017 Published: 23 May 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three - dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of the 96 pipe sleeve, through the selection of hardware, such as drill bits, machine tools, gears, shafts, and the simulation of Ansysworkbench force of main parts, obtain the design device and the processing method suitable for mass production of linear round flange parts with seat. It also can achieve drilling, reaming and tapping function conversion by adjusting the speed and dril.

Published in	International Journal of Mechanical Engineering and Applications (Volume 5, Issue 3)
DOI	10.11648/j.ijmea.20170503.15
Page(s)	168-174
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Drill, Multi Spindle, Porous Machining, Flange, CAD/CAM

References

[1]	DING Zhi-qiang, RAO Xi-xin, DING Zhi. Multi-Axis Transmission Intelligence CAD System Based on the Technology of KBE [J]. Mechanical & Electrical Engineering Magazine, 2004 (5): 47-50.
[2]	Chong Wang. Study on Multi-Spindle Horizontal Drilling machine Based on Pro/ENGINEER Analysis [D]. Cheng Du：Sichuan University, 2005：1-55.
[3]	Lianggui Pu, Minggang Ji. machine design [M]. BeiJing: Higher Education Press, 2006: 89-103.
[4]	Yongsheng Niu, Long Wu, Chunying Jiang, Li Li. Machinery manufacturing technology [M]. XiAn: Shaanxi science and Technology Press, 2002: 47-96.
[5]	The first automobile factory equipment design studio. Multi spindle design of gear transmission [M]. Beijing: Machinery Industry Press, 1979: 1-85.
[6]	Aizhen Wang. Engineering materials and forming technology [M]. Beijing: Machinery Industry Press, 2003: 22-65.
[7]	Xing Ai, Shigang Xiao. Concise Handbook of cutting parameters [S]. Beijing: Machinery Industry Press, 1994: 1-78.
[8]	Mingwang Li. Concise Handbook of machine tool fixture [S]. Beijing: Chemical Industry Press, 2003: 13-61.
[9]	Jingjin Xu. Ansys Workbenc project examples [M]. Beijing: People's Posts and Telecommunications Press, 2016: 13-32.
[10]	Yaodong Gao, Fucun Su, Zhen Li, Ming Yin. 30 cases of Ansys Workbenc mechanical engineering application [M]. Beijing: Electronic Industry Press, 2013: 1-70.

Cite This Article

Plain Text BibTeX RIS

APA Style

Shuangxi Jing, Xiaoyu Yang, Chenxu Luo, Jinle Yuan, Zhipeng Luo. (2017). Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. International Journal of Mechanical Engineering and Applications, 5(3), 168-174. https://doi.org/10.11648/j.ijmea.20170503.15

Copy | Download

ACS Style

Shuangxi Jing; Xiaoyu Yang; Chenxu Luo; Jinle Yuan; Zhipeng Luo. Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. Int. J. Mech. Eng. Appl. 2017, 5(3), 168-174. doi: 10.11648/j.ijmea.20170503.15

Copy | Download

AMA Style

Shuangxi Jing, Xiaoyu Yang, Chenxu Luo, Jinle Yuan, Zhipeng Luo. Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. Int J Mech Eng Appl. 2017;5(3):168-174. doi: 10.11648/j.ijmea.20170503.15

Copy | Download

@article{10.11648/j.ijmea.20170503.15,
  author = {Shuangxi Jing and Xiaoyu Yang and Chenxu Luo and Jinle Yuan and Zhipeng Luo},
  title = {Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {3},
  pages = {168-174},
  doi = {10.11648/j.ijmea.20170503.15},
  url = {https://doi.org/10.11648/j.ijmea.20170503.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170503.15},
  abstract = {According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three - dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of the 96 pipe sleeve, through the selection of hardware, such as drill bits, machine tools, gears, shafts, and the simulation of Ansysworkbench force of main parts, obtain the design device and the processing method suitable for mass production of linear round flange parts with seat. It also can achieve drilling, reaming and tapping function conversion by adjusting the speed and dril.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM
AU  - Shuangxi Jing
AU  - Xiaoyu Yang
AU  - Chenxu Luo
AU  - Jinle Yuan
AU  - Zhipeng Luo
Y1  - 2017/05/23
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170503.15
DO  - 10.11648/j.ijmea.20170503.15
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 168
EP  - 174
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170503.15
AB  - According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three - dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of the 96 pipe sleeve, through the selection of hardware, such as drill bits, machine tools, gears, shafts, and the simulation of Ansysworkbench force of main parts, obtain the design device and the processing method suitable for mass production of linear round flange parts with seat. It also can achieve drilling, reaming and tapping function conversion by adjusting the speed and dril.
VL  - 5
IS  - 3
ER  -

Copy | Download

Author Information

Shuangxi Jing

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
Xiaoyu Yang

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
Chenxu Luo

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
Jinle Yuan

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
Zhipeng Luo

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Shuangxi Jing, Xiaoyu Yang, Chenxu Luo, Jinle Yuan, Zhipeng Luo. (2017). Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. International Journal of Mechanical Engineering and Applications, 5(3), 168-174. https://doi.org/10.11648/j.ijmea.20170503.15

Copy | Download

ACS Style

Shuangxi Jing; Xiaoyu Yang; Chenxu Luo; Jinle Yuan; Zhipeng Luo. Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. Int. J. Mech. Eng. Appl. 2017, 5(3), 168-174. doi: 10.11648/j.ijmea.20170503.15

Copy | Download

AMA Style

Shuangxi Jing, Xiaoyu Yang, Chenxu Luo, Jinle Yuan, Zhipeng Luo. Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM. Int J Mech Eng Appl. 2017;5(3):168-174. doi: 10.11648/j.ijmea.20170503.15

Copy | Download

@article{10.11648/j.ijmea.20170503.15,
  author = {Shuangxi Jing and Xiaoyu Yang and Chenxu Luo and Jinle Yuan and Zhipeng Luo},
  title = {Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {3},
  pages = {168-174},
  doi = {10.11648/j.ijmea.20170503.15},
  url = {https://doi.org/10.11648/j.ijmea.20170503.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170503.15},
  abstract = {According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three - dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of the 96 pipe sleeve, through the selection of hardware, such as drill bits, machine tools, gears, shafts, and the simulation of Ansysworkbench force of main parts, obtain the design device and the processing method suitable for mass production of linear round flange parts with seat. It also can achieve drilling, reaming and tapping function conversion by adjusting the speed and dril.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Design of Multi Hole Machining Equipment for Flange Parts Based on CAD/CAM
AU  - Shuangxi Jing
AU  - Xiaoyu Yang
AU  - Chenxu Luo
AU  - Jinle Yuan
AU  - Zhipeng Luo
Y1  - 2017/05/23
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170503.15
DO  - 10.11648/j.ijmea.20170503.15
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 168
EP  - 174
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170503.15
AB  - According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three - dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of the 96 pipe sleeve, through the selection of hardware, such as drill bits, machine tools, gears, shafts, and the simulation of Ansysworkbench force of main parts, obtain the design device and the processing method suitable for mass production of linear round flange parts with seat. It also can achieve drilling, reaming and tapping function conversion by adjusting the speed and dril.
VL  - 5
IS  - 3
ER  -

Copy | Download