Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine

Xindan Zhang; Xu Zhang; Lianzheng Sun; Jinshi Lu; Xueheng Tao

doi:doi:10.11648/j.ijmea.20170501.13

| Peer-Reviewed

Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine

Xindan Zhang, Xu Zhang, Lianzheng Sun, Jinshi Lu, Xueheng Tao

Published in International Journal of Mechanical Engineering and Applications (Volume 5, Issue 1)

Received: 5 January 2017 Accepted: 13 January 2017 Published: 10 February 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A new type of shellfish precooking processing machine is designed. The corresponding three-dimensional solid model are constructed by use of SOLWORKS. It also introduces basic structure and working principle of shellfish precooking machine. Solid-liquid two-phase flow field for shellfish precooking processing machine is simulated by ANSYS FLUENT 15.0, which simulated the distribution of liquid flow and volume fraction of solid in the pot. The reasons of flow field distribution and the solid particle volume fraction of the liquid phase flow in the vertical and horizontal planes were analyzed under different mixing speeds. The results show that the solid-liquid two-phase flow field distribution is reasonable and turbulent region can be formed in the pot. The distribution of flow field and the texture properties of abalone were compared at three different speeds, and the more reasonable mixing speed was determined. The results of the analysis provide references for the optimization of mixer in the future.

Published in	International Journal of Mechanical Engineering and Applications (Volume 5, Issue 1)
DOI	10.11648/j.ijmea.20170501.13
Page(s)	20-27
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Shellfish Precooking Processing Machine, Mixer, Solid-Liquid Two-Phase Flow Field, Analysis

References

[1]	Wang, S. 2007, “Development and utilization of ancient agricultural China ancient shellfish”, Ancient and Modern Agriculture, vol. 63, no. 2, pp. 22-33.
[2]	Shen, J. Lin, W. Yu, W. Zhang, C. H. & Qin, X. M. 2008, “Current situation and development prospect of Chinese shellfish processing”, China Fisheries, vol. 9, no. 1, pp. 73-75.
[3]	Jiang, C. J. 2012, “Main problems and Development Countermeasures of shellfish processing industry in China”, Fisheries Information & Strategy, vol. 27, no. 2, pp. 87-93.
[4]	Ouyang, J. & Shen, J. 2014, “Current situation and Prospect of application of shellfish processing equipment in China”, Meat Research, vol. 28, no. 7, pp. 28-31.
[5]	Goya, A. B. Bellonio, D. Bonavigna, R. & Goya, R. G. 2012, “Quick freezing process in shellfish: Total volatile basic nitrogen and algal biotoxins values in scallops frozen on board in Argentina”, Cryobiology, vol. 65, no. 3, pp. 359-360.
[6]	Murchie, L. W. Cruz-Romero, M. Kerry, J. P. Linton, M. Patterson, M. F. & Smiddy, M. 2005, “High pressure processing of shellfish: A review of microbiological and other quality aspects”, Innovative Food Science & Emerging Technologies, vol. 6, no. 3, pp. 257-270.
[7]	Shang, J. H. 2013, Automatic mechanical design, Chinese Light Industry Press.
[8]	Wang, C. L. Ma,, Q. Y. Li, T. & Peng, N. 2007, “Stirring slurry pond of solid-liquid two-phase flow mixing numerical simulation”, Journal of Drainage and Irrigation Machinery Engineering, vol. 25, no. 6, pp. 38-41.
[9]	Du, F. L. Li, S. & B. He, L. 2013, “Numerical simulation of solid-liquid two-phase flow in a stirred tank of V type propeller agitator”, Manufacturing Automation, vol. 39, no. 9, pp. 3-5.
[10]	Zhong, L. 2003, “Numerical simulation of solid liquid suspension in stirred tank”, Beijing University of Chemical Technology, pp. 40-42.
[11]	Wang, Z. S. Li, L. C. & Huang. X. B. 2005, “CFD simulation of bottom flow field in solid liquid stirred tank,” Journal of Beijing University of Chemical Technology, vol. 32, no. 4, pp. 5-9.
[12]	Launder, B. E. & Spalding, D. B. 1974, “The numerical computation of turbulent flows”, Computer Methods in Applied Mechanics & Engineering, vol. 3, no. 2, pp. 269-289.
[13]	Zhu, B. W. 2013, “Research on the theory and technology of the processing of sea treasures”, Science Press, pp. 18-24.
[14]	Hu, X. D. Tian, Q. Qi, Z.& Jiang, D. 2013, “Based on the sliding mesh reactor internal fluid dynamics”, Pressure Vessel, vol. 23, no. 7, pp. 30-38.
[15]	Wang, M. H. Yang, Y. L. Gao, Z. L. Li, H. L. Zhang, J. & Yu, J. H. 2012, “Analysis of commonly used blender in food processing”, Agricultural Products Processing and Comprehensive Journal, vol. 35, no. 9, pp. 74-76.
[16]	Xiao, G. H. Zhu, B. W. Dong, X. P. Chen, X. J. & Chen, Z. 2012, “Effect of thermal processing conditions on the processing characteristic of gastropod abalone”, Journal of Dalian University of technology, vol. 31, no. 1, pp. 36-38.
[17]	Shen, H. P. & Zhang, S. L. 2001, “Flow field analysis of propeller, 45 degree blade impeller and new type axial flow impeller”, Journal of the University of Petroleum and Chemical Engineering, vol. 14, no. 1, pp. 55-58.
[18]	Xiao, G. H. Zhu, B. W. Dong, X. P. Chen, X. J. & Zheng, J. 2010, “Gastropod abalone in different parts of the structure characteristics and tissue structure”, Food Science and Technology, vol. 12, no. 11, pp. 155-159, 2010.

Cite This Article

Plain Text BibTeX RIS

APA Style

Xindan Zhang, Xu Zhang, Lianzheng Sun, Jinshi Lu, Xueheng Tao. (2017). Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. International Journal of Mechanical Engineering and Applications, 5(1), 20-27. https://doi.org/10.11648/j.ijmea.20170501.13

Copy | Download

ACS Style

Xindan Zhang; Xu Zhang; Lianzheng Sun; Jinshi Lu; Xueheng Tao. Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. Int. J. Mech. Eng. Appl. 2017, 5(1), 20-27. doi: 10.11648/j.ijmea.20170501.13

Copy | Download

AMA Style

Xindan Zhang, Xu Zhang, Lianzheng Sun, Jinshi Lu, Xueheng Tao. Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. Int J Mech Eng Appl. 2017;5(1):20-27. doi: 10.11648/j.ijmea.20170501.13

Copy | Download

@article{10.11648/j.ijmea.20170501.13,
  author = {Xindan Zhang and Xu Zhang and Lianzheng Sun and Jinshi Lu and Xueheng Tao},
  title = {Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {1},
  pages = {20-27},
  doi = {10.11648/j.ijmea.20170501.13},
  url = {https://doi.org/10.11648/j.ijmea.20170501.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170501.13},
  abstract = {A new type of shellfish precooking processing machine is designed. The corresponding three-dimensional solid model are constructed by use of SOLWORKS. It also introduces basic structure and working principle of shellfish precooking machine. Solid-liquid two-phase flow field for shellfish precooking processing machine is simulated by ANSYS FLUENT 15.0, which simulated the distribution of liquid flow and volume fraction of solid in the pot. The reasons of flow field distribution and the solid particle volume fraction of the liquid phase flow in the vertical and horizontal planes were analyzed under different mixing speeds. The results show that the solid-liquid two-phase flow field distribution is reasonable and turbulent region can be formed in the pot. The distribution of flow field and the texture properties of abalone were compared at three different speeds, and the more reasonable mixing speed was determined. The results of the analysis provide references for the optimization of mixer in the future.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine
AU  - Xindan Zhang
AU  - Xu Zhang
AU  - Lianzheng Sun
AU  - Jinshi Lu
AU  - Xueheng Tao
Y1  - 2017/02/10
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170501.13
DO  - 10.11648/j.ijmea.20170501.13
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 20
EP  - 27
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170501.13
AB  - A new type of shellfish precooking processing machine is designed. The corresponding three-dimensional solid model are constructed by use of SOLWORKS. It also introduces basic structure and working principle of shellfish precooking machine. Solid-liquid two-phase flow field for shellfish precooking processing machine is simulated by ANSYS FLUENT 15.0, which simulated the distribution of liquid flow and volume fraction of solid in the pot. The reasons of flow field distribution and the solid particle volume fraction of the liquid phase flow in the vertical and horizontal planes were analyzed under different mixing speeds. The results show that the solid-liquid two-phase flow field distribution is reasonable and turbulent region can be formed in the pot. The distribution of flow field and the texture properties of abalone were compared at three different speeds, and the more reasonable mixing speed was determined. The results of the analysis provide references for the optimization of mixer in the future.
VL  - 5
IS  - 1
ER  -

Copy | Download

Author Information

Xindan Zhang

Key Laboratory for Seafood Processing Technology and Equipment of Liaoning Province, Dalian Polytechnic University, Dalian, China
Xu Zhang

Key Laboratory for Seafood Processing Technology and Equipment of Liaoning Province, Dalian Polytechnic University, Dalian, China
Lianzheng Sun

Key Laboratory for Seafood Processing Technology and Equipment of Liaoning Province, Dalian Polytechnic University, Dalian, China
Jinshi Lu

Key Laboratory for Seafood Processing Technology and Equipment of Liaoning Province, Dalian Polytechnic University, Dalian, China
Xueheng Tao

Key Laboratory for Seafood Processing Technology and Equipment of Liaoning Province, Dalian Polytechnic University, Dalian, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xindan Zhang, Xu Zhang, Lianzheng Sun, Jinshi Lu, Xueheng Tao. (2017). Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. International Journal of Mechanical Engineering and Applications, 5(1), 20-27. https://doi.org/10.11648/j.ijmea.20170501.13

Copy | Download

ACS Style

Xindan Zhang; Xu Zhang; Lianzheng Sun; Jinshi Lu; Xueheng Tao. Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. Int. J. Mech. Eng. Appl. 2017, 5(1), 20-27. doi: 10.11648/j.ijmea.20170501.13

Copy | Download

AMA Style

Xindan Zhang, Xu Zhang, Lianzheng Sun, Jinshi Lu, Xueheng Tao. Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine. Int J Mech Eng Appl. 2017;5(1):20-27. doi: 10.11648/j.ijmea.20170501.13

Copy | Download

@article{10.11648/j.ijmea.20170501.13,
  author = {Xindan Zhang and Xu Zhang and Lianzheng Sun and Jinshi Lu and Xueheng Tao},
  title = {Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {5},
  number = {1},
  pages = {20-27},
  doi = {10.11648/j.ijmea.20170501.13},
  url = {https://doi.org/10.11648/j.ijmea.20170501.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20170501.13},
  abstract = {A new type of shellfish precooking processing machine is designed. The corresponding three-dimensional solid model are constructed by use of SOLWORKS. It also introduces basic structure and working principle of shellfish precooking machine. Solid-liquid two-phase flow field for shellfish precooking processing machine is simulated by ANSYS FLUENT 15.0, which simulated the distribution of liquid flow and volume fraction of solid in the pot. The reasons of flow field distribution and the solid particle volume fraction of the liquid phase flow in the vertical and horizontal planes were analyzed under different mixing speeds. The results show that the solid-liquid two-phase flow field distribution is reasonable and turbulent region can be formed in the pot. The distribution of flow field and the texture properties of abalone were compared at three different speeds, and the more reasonable mixing speed was determined. The results of the analysis provide references for the optimization of mixer in the future.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Analysis of Solid-Liquid Two-Phase Flow Field for Shellfish Precooking Processing Machine
AU  - Xindan Zhang
AU  - Xu Zhang
AU  - Lianzheng Sun
AU  - Jinshi Lu
AU  - Xueheng Tao
Y1  - 2017/02/10
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmea.20170501.13
DO  - 10.11648/j.ijmea.20170501.13
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 20
EP  - 27
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20170501.13
AB  - A new type of shellfish precooking processing machine is designed. The corresponding three-dimensional solid model are constructed by use of SOLWORKS. It also introduces basic structure and working principle of shellfish precooking machine. Solid-liquid two-phase flow field for shellfish precooking processing machine is simulated by ANSYS FLUENT 15.0, which simulated the distribution of liquid flow and volume fraction of solid in the pot. The reasons of flow field distribution and the solid particle volume fraction of the liquid phase flow in the vertical and horizontal planes were analyzed under different mixing speeds. The results show that the solid-liquid two-phase flow field distribution is reasonable and turbulent region can be formed in the pot. The distribution of flow field and the texture properties of abalone were compared at three different speeds, and the more reasonable mixing speed was determined. The results of the analysis provide references for the optimization of mixer in the future.
VL  - 5
IS  - 1
ER  -

Copy | Download