Energy and food are very intertwined and important in human life. Cashew juice is a very abundant product in southern Senegal. Unfortunately, due to lack of processing and conservation, this product cannot last 24 hours without being fermented. The aim of this study is to study the heat treatment processes of agri-food products, particularly the pasteurization of cashew fruit juices. Pasteurization often uses heat from fossil fuels. In this heat treatment process of cashew juice, we are interested in the energy source. Thus thermal solar energy is used in this heat treatment. A solar thermal collector with an area of 17.9 m2 and a hot water storage tank with a capacity of 0.1 m3 are used. With the pasteurization model used, the juice circulates in a copper coil immersed in hot water coming from the solar thermal field or the hot water storage tank. A numerical simulation program has been developed on Ansys Fluent 2020 R1 to study the evolution of the temperature of the juice from the inlet to the outlet of the coil. The results obtained give outlet temperatures varying from 70 to 80°C depending on the speed of circulation of the juice. We can also achieve outlet temperatures of 100°C. This means that our system can operate in sterilizer mode.
| Published in | International Journal of Energy and Power Engineering (Volume 12, Issue 1) |
| DOI | 10.11648/j.ijepe.20231201.11 |
| Page(s) | 1-8 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Pasteurization, Solar Thermal Collectors, Storage Tank, Thermal Treatment
| [1] | Jing Peng, Juming Tang, Diane M. Barrett, Shyam S. Sablani, Nathan Anderson & Joseph R. Powers (2017) Thermal pasteurization of ready-to-eat foods and vegetables: Critical factors for process design and effects on quality, Critical Reviews in Food Science and Nutrition, 57: 14, 2970-2995, DOI: 10.1080/10408398.2015.1082126. |
| [2] | Silva, F. V. M., Gibbs, P. A., Nunez, H., Almonacid, S. and Simpson, R. (2014). Thermal Processes: Pasteurization. Encyclopedia of Food Microbiology, 577–595. 2nd edition. Academic Press, San Diego. |
| [3] | Wilbey, R. A. (2014). Heat treatment of foods: principles of pasteurization. Encyclopedia of Food Microbiology, 169–174. 2nd edition. Academic Press, San Diego. |
| [4] | Van Boekel, M. A. J. S. (2008). Kinetic modeling of food quality: A critical review. Compr. Rev. Food Sci. F. 7: 144–158. |
| [5] | Ling, B., Tang, J., Kong, F., Mitcham, E. J. and Wang, S. (2015). Kinetics of food quality changes during thermal processing: A review. Food Bioprocess Technol. 8: 343–358. |
| [6] | Muhammad Aamir, Mahmoudreza Ovissipour, Shyam S. Sablani, and Barbara Rasco (2013). Predicting the Quality of Pasteurized Vegetables Using Kinetic Models: A Review. International Journal of Food Science Volume 2013, Article ID 271271, 29 pages http://dx.doi.org/10.1155/2013/271271 |
| [7] | G. Maesmans, M. Hendrickx, Z. Weng, A. Keteleer, and P. Tobback, “Endpoint definition, determination and evaluation of thermal processes in food preservation,” Belgian Journal of Food Chemistry and Biotechnology, vol. 45, no. 5, pp. 179–192, 1990. |
| [8] | Kai Reineke, Alexander Mathys & Dietrich Knorr (2011) Shift of pH-Value During Thermal Treatments in Buffer Solutions and Selected Foods, International Journal of Food Properties, 14: 4, 870-881, DOI: 10.1080/10942910903456978. |
| [9] | M. E. Bruins, A. M. Matser, A. E. M. Janssen & R. M. Boom (2007) Buffer selection for HP treatment of biomaterials and its consequences for enzyme inactivation studies, High Pressure Research, 27: 1, 101-107, DOI: 10.1080/08957950601082573. |
| [10] | Steinfeld, J. I., Francisco, J. S. and Hase, W. L. (1998). Chemical Kinetics and Dynamics. 2nd ed. Prentice Hall, Upper Saddle River, NJ. |
| [11] | Quinlan, R. J. & Reinhart, G. D. (2005). Baroresistant buffer mixtures for biochemical analyses. Analytical Biochemistry, 341, 69-76. |
| [12] | Benjamin Greening Adisa Azapagic Walaa Mousa Hashim et al. (2014). Domestic solar thermal water heating: A sustainable option for the UK; Renewable Energy; Volume 63, March 2014, Pages 23-36. |
| [13] | Nurril Ikmal Shamsul Azha et al. (2020). Thermal Performance Enhancement in Flat Plate Solar Collector Solar Water Heater: A Review, Processes 2020, 8, 756; doi: 10.3390/pr8070756. |
| [14] | W. M. Hasan et al., 2018, Case study on solar water heating for flat plate collector, Case Studies in Thermal Engineering 12 (2018) 666-671. |
| [15] | M. C Rodriguez-Hidalgo, P. A. Rodriguez-Aumente, A Lecuona, G. L. Gutiérrez-Urueta, R Ventas. Flat Plate Thermal Solar Collector Efficiency: Transient Behavior Under Working Conditions. Part I: Model Description And Experimental Validation. Applied Thermal Engineering, Elsevier, 2011, 31 (14-15), pp. 2394. |
| [16] | Rostami, S.; Abd Hamid, A. S.; Sopian, K.; Jarimi, H.; Bassim, A.; Ibrahim, A. Heat Transfer Analysis of the Flat Plate Solar Thermal Collectors with Elliptical and Circular Serpentine Tubes. Appl. Sci. 2022, 12, 4519. https://doi.org/ 10.3390/app12094519 |
| [17] | Rosli, M. A. M.; Misha, S.; Sopian, K.; Bin Mat, S.; Sulaiman, M. Y. Parametric Analysis on Heat Removal Factor for a Flat Plate Solar Collector of Serpentine Tube. World Appl. Sci. J. 2014, 29, 184–187. |
| [18] | Alicja Siuta-Olcha, Tomasz Cholewa, Kin ga Dopieralska-Howoruszko, (2020). Experimental studies of thermal performance of an evacuated tube heat pipe solar collector in Polish climatic conditions, Environmental Science and Pollution Research (2021) 28: 14319–14328, https://doi.org/10.1007/s11356-020-07920-3 |
| [19] | S. Thiao, A. Mar, R. M. ND. Dioh, C. Mbow and I. Youm, (2018). Feasibility Study of Solar Thermal cooling Warehouse on a remote Area: Estimation of the Solar Thermal Collector Area and Efficiency. International Journal on Energy Conversion (IRECON) 6 (3), PP. 90-96. |
| [20] | M. Ghazi, E. Essadiqi, M. Mada, M. Faqir and A. Benabdellah (2018). Optimal Number of Effects for Multi Effect Evaporation Seawater Desalinisation Process Using Solar Thermal Energy-Plate Evaporators. International Journal on Energy Conversion (IRECON) 6 (3), PP. 97-105. |
| [21] | Jiangjiang Wang, Rujing Yan, Zhuang Wang, Xutao Zhang and Guohua Shi (2018) Thermal Performance Analysis of an Absorption Cooling System Based on Parabolic Trough Solar Collectors. Energies 2018, 11, 2679; doi: 103390/en11102679. |
| [22] | N. Fumo, V. Bortone and J. C. Zambrono (2013), Comparative Analysis of Solar Thermal Cooling and Solar Photovoltaic Cooling Systems. Journal of Solar Energy Engineering vol. 135/021003-3. |
| [23] | Li Huang, Rongyue Zheng and Udo Piontek (2019). Installation and operation of Solar Cooling and Heating System Incorporated with Air Source Heat Pumps. Energies 2019, 12, 996; doi: 103390/en12060996. |
| [24] | Imran Nazir Unar et al. Performance evaluation of solar flat plate collector using different working fluids through computational fluid dynamics. SN Applied Sciences (2020) 2: 209 | https://doi.org/10.1007/s42452-020-2005-z |
APA Style
Serigne Thiao, Omar Drame, Joseph Sambasene Diatta, Awa Mar, Diouma Kobor. (2023). Solar Thermal Treatment: Case Study for Cashew Juice Pasteurization. International Journal of Energy and Power Engineering, 12(1), 1-8. https://doi.org/10.11648/j.ijepe.20231201.11
ACS Style
Serigne Thiao; Omar Drame; Joseph Sambasene Diatta; Awa Mar; Diouma Kobor. Solar Thermal Treatment: Case Study for Cashew Juice Pasteurization. Int. J. Energy Power Eng. 2023, 12(1), 1-8. doi: 10.11648/j.ijepe.20231201.11
AMA Style
Serigne Thiao, Omar Drame, Joseph Sambasene Diatta, Awa Mar, Diouma Kobor. Solar Thermal Treatment: Case Study for Cashew Juice Pasteurization. Int J Energy Power Eng. 2023;12(1):1-8. doi: 10.11648/j.ijepe.20231201.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijepe.20231201.11,
author = {Serigne Thiao and Omar Drame and Joseph Sambasene Diatta and Awa Mar and Diouma Kobor},
title = {Solar Thermal Treatment: Case Study for Cashew Juice Pasteurization},
journal = {International Journal of Energy and Power Engineering},
volume = {12},
number = {1},
pages = {1-8},
doi = {10.11648/j.ijepe.20231201.11},
url = {https://doi.org/10.11648/j.ijepe.20231201.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20231201.11},
abstract = {Energy and food are very intertwined and important in human life. Cashew juice is a very abundant product in southern Senegal. Unfortunately, due to lack of processing and conservation, this product cannot last 24 hours without being fermented. The aim of this study is to study the heat treatment processes of agri-food products, particularly the pasteurization of cashew fruit juices. Pasteurization often uses heat from fossil fuels. In this heat treatment process of cashew juice, we are interested in the energy source. Thus thermal solar energy is used in this heat treatment. A solar thermal collector with an area of 17.9 m2 and a hot water storage tank with a capacity of 0.1 m3 are used. With the pasteurization model used, the juice circulates in a copper coil immersed in hot water coming from the solar thermal field or the hot water storage tank. A numerical simulation program has been developed on Ansys Fluent 2020 R1 to study the evolution of the temperature of the juice from the inlet to the outlet of the coil. The results obtained give outlet temperatures varying from 70 to 80°C depending on the speed of circulation of the juice. We can also achieve outlet temperatures of 100°C. This means that our system can operate in sterilizer mode.},
year = {2023}
}
TY - JOUR T1 - Solar Thermal Treatment: Case Study for Cashew Juice Pasteurization AU - Serigne Thiao AU - Omar Drame AU - Joseph Sambasene Diatta AU - Awa Mar AU - Diouma Kobor Y1 - 2023/01/10 PY - 2023 N1 - https://doi.org/10.11648/j.ijepe.20231201.11 DO - 10.11648/j.ijepe.20231201.11 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 1 EP - 8 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.20231201.11 AB - Energy and food are very intertwined and important in human life. Cashew juice is a very abundant product in southern Senegal. Unfortunately, due to lack of processing and conservation, this product cannot last 24 hours without being fermented. The aim of this study is to study the heat treatment processes of agri-food products, particularly the pasteurization of cashew fruit juices. Pasteurization often uses heat from fossil fuels. In this heat treatment process of cashew juice, we are interested in the energy source. Thus thermal solar energy is used in this heat treatment. A solar thermal collector with an area of 17.9 m2 and a hot water storage tank with a capacity of 0.1 m3 are used. With the pasteurization model used, the juice circulates in a copper coil immersed in hot water coming from the solar thermal field or the hot water storage tank. A numerical simulation program has been developed on Ansys Fluent 2020 R1 to study the evolution of the temperature of the juice from the inlet to the outlet of the coil. The results obtained give outlet temperatures varying from 70 to 80°C depending on the speed of circulation of the juice. We can also achieve outlet temperatures of 100°C. This means that our system can operate in sterilizer mode. VL - 12 IS - 1 ER -
Email: