| Peer-Reviewed

Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC)

Received: 8 December 2021     Accepted: 21 December 2021     Published: 25 February 2022
Views:       Downloads:
Abstract

Today the world is full of time-dependent phenomena in all fields: physics, chemistry, mechanics and many others. Time acts on the performance of any system whatever its nature is. When a system operates over time, aging becomes a real concern. Regarding fuel cells, several degradation phenomena can occur in a short or long term. Short-term phenomena are generally referred to as reversible degradations, these degradations are of the order of the microsecond and can go up to hours and sometimes to days, such as problems related to water management. The long term degradations are usually called irreversible degradations; it can be defined as aging. This phenomenon is of the order of a day and can increase up to months. In order to mitigate the impact of aging on the fuel cell system performance, good corrective actions must be taken. To do so, the performance prediction during the aging of the fuel cell system must be conducted. In this paper a verified and tested prognosis approach applicable to fuel cells is presented. The novelty in the approach used is linked to its modular structure. In fact, this approach has three phases. The first one aims to identify the internal physical parameters of the stack using an optimization algorithm on experimental data and a static fuel cell model. The second one predicts the temporal evolution of these parameters using a prediction algorithm. Finally, the reconstruction phase consists in the prediction of parameters that are re-injected into the model to reconstruct polarization curves and thus reflect the performance degradation of the fuel cell. The reliability and repeatability of the proposed approach have been successfully validated on two data sets from two different experimental campaigns.

Published in International Journal of Energy and Power Engineering (Volume 11, Issue 1)
DOI 10.11648/j.ijepe.20221101.12
Page(s) 17-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Proton Exchange Membrane Fuel Cell, Aging, Prognosis, ARMA Model, Stack Internal Parameters

References
[1] Seyhan M, Akansu YE, Murat M, Korkmaz Y, Akansu So (2017). Performance prediction of PEM fuel cell with wavy serpentine flow channel by using artificial neural network. International Journal on Hydrogen Energy, Vol. 42 (40).
[2] Zhang X, Yang D, Luo M, Dong Z (2017). Load profile based empirical model for the lifetime prediction of an automotive PEM fuel cell. International Journal on Hydrogen Energy, Vol. 42 (16).
[3] Mao L, Jackson L, Davies B (2018). Investigation of PEMFC fault diagnosis with consideration of sensor reliability. International Journal on Hydrogen Energy, Vol. 43 (35).
[4] Steiner N. Y., Hissel D., Moçotéguy P., Candusso D. (2011), Diagnosis of polymer electrolyte fuel cells failure modes (flooding & drying out) by neural networks modeling, International Journal on Hydrogen Energy, Vol. 36, pp. 3067–3075.
[5] Mohammadi A, Djerdir A, Steiner N, Khaburi D. (2015). Advanced diagnosis based on temperature and current density distributions in a single PEMFC. International Journal on Hydrogen Energy, Vol. 40 (45).
[6] Baik K. D., Kong I. M., Hong B. K., Kim S. H., Kim M. S. (2013). Local measurements of hydrogen crossover rate in polymer electrolyte membrane fuel cells, Applied Energy, Vol. 101, pp. 560-566.
[7] Jung G. B., Chuang K. Y., Jao T. C., Yeh C. C., Lin C. Y. (2012). Study of high voltage applied to the membrane electrode assemblies of proton exchange membrane fuel cells as an accelerated degradation technique, Applied Energy, Vol. 100, pp. 81-86.
[8] Jouin M., Gouriveau R., Hissel D., Pera M. C., Zerhouni N. (2015). PEMFC aging modeling for prognosis and health assessment, 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS 2015, pp. 790–795.
[9] Wu Y., Breaz E., Gao F., Miraoui A. (2015). Prediction of PEMFC Stack Aging Based On Relevance Vector Machine, IEEE Transportation Electrification Conference ITEC’2015.
[10] Bressel M., Hialiret M., Hissel D., Ould Bouamama B. (2016). Extended Kalman filter for prognostic of proton exchange membrane fuel cell, Applied Energy, Vol. 164, pp. 220-227.
[11] Macauley N., Watson M., Lauritzen M., Knights S., Gary Wang G., Kjeang E. (2016). Empirical membrane lifetime model for heavy duty fuel cell systems, Journal of Power Sources, Vol. 336, pp. 240-250.
[12] Jouin M., Gouriveau R., Hissel D., Péra M. C. and Zerhouni N. (2016). Degradations analysis and aging modeling for health assessment and prognostics of PEMFC, Reliability Engineering and System Safety, Vol. 148, pp. 78–95.
[13] Pei P., Chen H. (2014). Main factors affecting the lifetime of proton exchange membrane fuel cells in vehicle applications: A review, Applied Energy, Vol. 125, pp. 60-75.
[14] Jouin M, Gouriveau R, Hissel D, Pera M, Zerhouni N. (2014). Prognostics of PEM fuel cell in a particle filtering framework. International Journal on Hydrogen Energy, Vol. 39, pp. 481–94.
[15] Blunier B., Miraoui A. (2010). Proton Exchange Membrane Fuel Cell Air Management in Automotive Applications, Journal of Fuel Cell Science and Technology, Vol. 7 (4).
[16] Morando S., Jemei S., Hissel D., Gouriveau R., and Zerhouni N. (2015). ANOVA method applied to Proton Exchange Membrane fuel cell ageing forecasting using an echo state network, Mathematics and Computers in Simulation, Vol. 131, pp. 1–12.
[17] Silva, R. E., Gouriveau R., Jemei S., Hissel D., Boulon L., Agbossou K. (2014). Proton exchange membrane fuel cell degradation prediction based on Adaptive Neuro-Fuzzy Inference Systems. International Journal on Hydrogen Energy, Vol. 39 (21).
[18] Morando S., Jemei S., Hissel D., Gouriveau R. and Zerhouni N. (2017). Proton exchange membrane fuel cell ageing forecasting algorithm based on echo state network. International Journal on Hydrogen Energy, Vol. 42 (2).
[19] Robin C., Gerard M., Franco A. A., Schott P. (2013). Multi-scale coupling between two dynamical models for PEMFC aging prediction. International Journal on Hydrogen Energy, Vol. 38 (11), pp. 4675–4688.
[20] Kurz T., Hakenjos A., Krämer J., Zedda M., Agert C. (2008). An impedance-based predictive control strategy for the state-of-health of PEM fuel cell stacks. Journal of Power Sources, Vol. 180, pp. 742–747.
[21] Rubio M. A., Urquia A., Dormido S. (2010). Diagnosis of performance degradation phenomena in PEM fuel cells. International Journal on Hydrogen Energy, Vol. 35.
[22] Fouquet N., Doulet C., Nouillant C., Dauphin-Tanguy G. and Ould-Bouamama B. (2006). Model based PEM fuel cell state-of-health monitoring via ac impedance measurements. Journal of Power Sources, Vol. 159, pp. 905–1013.
[23] Schwartz J. (1994). Air pollution and hospital admissions for the elderly in Birmingham, Alabama. American Journal of Epidemiology, Vol. 139, pp. 589-598.
[24] Box G. E. P. and Jenkins G. M. (1970). Time series analysis: Forecasting and control. Wiley Series in Probability and Statistics, Wiley Ed.
[25] Yule U. (1927). On a method of investigating periodicities in disturbed series, with special reference to wolfer’s sunspot numbers. Philosophical Transactions of the Royal Society, Vol. 226.
[26] Slutzky E. (1927). The summation of random causes as the source of cyclic processes. Econometrica, Vol. 5, pp. 105–146.
[27] Erdem E., Shi J. (2011). ARMA based approaches for forecasting the tuple of wind speed and direction, Applied Energy, Vol. 88, pp. 1405–1414.
[28] Hao Y., Tian C. (2019). A novel two-stage forecasting model based on error factor and ensemble method for multi-step wind power forecasting, Applied Energy, Vol. 238, pp. 368–383.
[29] Loi T. S. A., Ng J. L. (2018). Anticipating electricity prices for future needs – Implications for liberalized retail markets, Applied Energy, Vol. 212, pp. 244–264.
[30] David M., Ramahatana F., Trombe P. J. and Lauret P. (2016). Probabilistic forecasting of the solar irradiance with recursive ARMA and GARCH models, Solar Energy, Vol. 133, pp. 55–72.
[31] Wang X., Huang L. and Yang C. (2018). Prediction model of slurry pH based on mechanism and error compensation for mineral flotation process, Chinese Journal of Chemical Engineering, Vol. 26, pp. 1766–1772.
[32] Ervural B. C., Beyca O. F. and Zaim S. (2016). Model estimation of ARMA using genetic algorithms: A case study of forecasting natural gas consumption, Procedia - Social and Behavioral Sciences, Vol. 235, pp. 537–545.
[33] Klepsch J., Klüppelberg C. and Wei T. (2017). Prediction of functional ARMA processes with an application to traffic data, Econometrics and Statistics, Vol. 1, pp. 128–149.
[34] Ying Z., Rui K. and Shihong X., Research on Glucose Concentration Predicting Based on ARMA Model (2014). Prognostics and System Health Management Conference PHM’2014, Hunan, China.
[35] Kexin W., Mingxing D. (2010). A Temperature Prediction Method of IGBT Based on Time Series Analysis, The 2nd International Conference on Computer and Automation Engineering ICCAE’10.
[36] Dang P., Zhang H., Yun X. and Ren H. (2017). Fault prediction of rolling bearing based on ARMA model, International Conference on Computer Systems, Electronics and Control ICCSEC’17.
[37] Ning C. X., Wang, J. S. (2015). Auto Regressive Monving Average (ARMA) prediction method of bank cash flow time series, proceedings of the 34th Chinese Control Conference, Hangzhou, China.
[38] Detti A. H., Jemei S. and Yousfi Steiner N. (2018). Proton exchange membrane fuel cell model for prognosis, 2018 IEEE Vehicle Power and Propulsion Conference VPPC’18, Chicago, USA.
[39] Wold H. (1938). A study in the Analysis of Stationary Time Series. Almgrist and Wiksell.
[40] http://giantleap.eu/
Cite This Article
  • APA Style

    Abdelkader Detti, Nadia Yousfi Steiner, Laurent Bouillaut, Allou Badara Samé, Samir Jemei. (2022). Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC). International Journal of Energy and Power Engineering, 11(1), 17-29. https://doi.org/10.11648/j.ijepe.20221101.12

    Copy | Download

    ACS Style

    Abdelkader Detti; Nadia Yousfi Steiner; Laurent Bouillaut; Allou Badara Samé; Samir Jemei. Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC). Int. J. Energy Power Eng. 2022, 11(1), 17-29. doi: 10.11648/j.ijepe.20221101.12

    Copy | Download

    AMA Style

    Abdelkader Detti, Nadia Yousfi Steiner, Laurent Bouillaut, Allou Badara Samé, Samir Jemei. Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC). Int J Energy Power Eng. 2022;11(1):17-29. doi: 10.11648/j.ijepe.20221101.12

    Copy | Download

  • @article{10.11648/j.ijepe.20221101.12,
      author = {Abdelkader Detti and Nadia Yousfi Steiner and Laurent Bouillaut and Allou Badara Samé and Samir Jemei},
      title = {Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC)},
      journal = {International Journal of Energy and Power Engineering},
      volume = {11},
      number = {1},
      pages = {17-29},
      doi = {10.11648/j.ijepe.20221101.12},
      url = {https://doi.org/10.11648/j.ijepe.20221101.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20221101.12},
      abstract = {Today the world is full of time-dependent phenomena in all fields: physics, chemistry, mechanics and many others. Time acts on the performance of any system whatever its nature is. When a system operates over time, aging becomes a real concern. Regarding fuel cells, several degradation phenomena can occur in a short or long term. Short-term phenomena are generally referred to as reversible degradations, these degradations are of the order of the microsecond and can go up to hours and sometimes to days, such as problems related to water management. The long term degradations are usually called irreversible degradations; it can be defined as aging. This phenomenon is of the order of a day and can increase up to months. In order to mitigate the impact of aging on the fuel cell system performance, good corrective actions must be taken. To do so, the performance prediction during the aging of the fuel cell system must be conducted. In this paper a verified and tested prognosis approach applicable to fuel cells is presented. The novelty in the approach used is linked to its modular structure. In fact, this approach has three phases. The first one aims to identify the internal physical parameters of the stack using an optimization algorithm on experimental data and a static fuel cell model. The second one predicts the temporal evolution of these parameters using a prediction algorithm. Finally, the reconstruction phase consists in the prediction of parameters that are re-injected into the model to reconstruct polarization curves and thus reflect the performance degradation of the fuel cell. The reliability and repeatability of the proposed approach have been successfully validated on two data sets from two different experimental campaigns.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Hybrid Ageing Model of a Proton Exchange Membrane Fuel Cell (PEMFC)
    AU  - Abdelkader Detti
    AU  - Nadia Yousfi Steiner
    AU  - Laurent Bouillaut
    AU  - Allou Badara Samé
    AU  - Samir Jemei
    Y1  - 2022/02/25
    PY  - 2022
    N1  - https://doi.org/10.11648/j.ijepe.20221101.12
    DO  - 10.11648/j.ijepe.20221101.12
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 17
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20221101.12
    AB  - Today the world is full of time-dependent phenomena in all fields: physics, chemistry, mechanics and many others. Time acts on the performance of any system whatever its nature is. When a system operates over time, aging becomes a real concern. Regarding fuel cells, several degradation phenomena can occur in a short or long term. Short-term phenomena are generally referred to as reversible degradations, these degradations are of the order of the microsecond and can go up to hours and sometimes to days, such as problems related to water management. The long term degradations are usually called irreversible degradations; it can be defined as aging. This phenomenon is of the order of a day and can increase up to months. In order to mitigate the impact of aging on the fuel cell system performance, good corrective actions must be taken. To do so, the performance prediction during the aging of the fuel cell system must be conducted. In this paper a verified and tested prognosis approach applicable to fuel cells is presented. The novelty in the approach used is linked to its modular structure. In fact, this approach has three phases. The first one aims to identify the internal physical parameters of the stack using an optimization algorithm on experimental data and a static fuel cell model. The second one predicts the temporal evolution of these parameters using a prediction algorithm. Finally, the reconstruction phase consists in the prediction of parameters that are re-injected into the model to reconstruct polarization curves and thus reflect the performance degradation of the fuel cell. The reliability and repeatability of the proposed approach have been successfully validated on two data sets from two different experimental campaigns.
    VL  - 11
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Franche-Comté Electronics Mechanics Thermal Science and Optics – Sciences and Technologies, University of Bourgogne Franche-Comte, Belfort, France

  • Franche-Comté Electronics Mechanics Thermal Science and Optics – Sciences and Technologies, University of Bourgogne Franche-Comte, Belfort, France

  • Engineering of Surface Transportation Networks and Advanced Computing Laboratory, University Gustave Eiffel, Marne-la-Vallée, France

  • Engineering of Surface Transportation Networks and Advanced Computing Laboratory, University Gustave Eiffel, Marne-la-Vallée, France

  • Franche-Comté Electronics Mechanics Thermal Science and Optics – Sciences and Technologies, University of Bourgogne Franche-Comte, Belfort, France

  • Sections