Graphene has a significant reinforcing effect. Titanium and titanium alloys have excellent properties such as high specific strength and good corrosion resistance compared to steel, and have broad application prospects in fields such as aerospace, automotive manufacturing, chemical engineering, and biomedical equipment. Graphene, as a new member of the carbon family, not only has excellent physical and mechanical properties, but also has a unique two-dimensional structure. This 2D structure has a higher specific surface area than CNT or graphite. Thus providing more contact area and interaction with the matrix material, these characteristics are very attractive for the research of composite materials. MLG/Flake Ti hybrid powder was prepared using high-energy ball milling, and then MLG/Flake Ti composite material was prepared through low-temperature high-pressure SPS preforming and high-temperature heat treatment (950°C). Perform high-temperature heat treatment at 950°C and set the insulation time to 10 minutes and 60 minutes respectively. After heat treatment, the hardness and yield strength of the material were significantly improved. After 10 minutes of heat treatment, the sample with 0.2wt% MLG added showed a yield strength of 2225MPa and an elongation of 30%, demonstrating a good match between strength and plasticity. Compared with the sample with only 0.1wt% MLG added, the strength improvement is nearly 60%. This indicates that the increase in MLG content has a significant strengthening effect.
| Published in | American Journal of Energy Engineering (Volume 11, Issue 2) |
| DOI | 10.11648/j.ajee.20231102.15 |
| Page(s) | 67-70 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Graphene, Titanium Based, Strength, Hardness, Heat Treatment
| [1] | Kim H J, Kim D E. Water Lubrication of Stainless Steel using Reduced Graphene Oxide Coating [J]. Sci Rep-Uk, 2015, 5: |
| [2] | Zhou X, Song S Y, Li L et al. Molecular dynamics simulation for mechanical properties of magnesium matrix composites reinforced with nickel-coated single-walled carbon nanotubes [J]. Journal of Composite Materials, 2016, 50 (2): 191-200. |
| [3] | Restuccia P, Righi M C. Tribochemistry of graphene on iron and its possible role in lubrication of steel [J]. Carbon, 2016, 106: 118-124. |
| [4] | Jiang J L, He X X, Du J F et al. In-situ fabrication of graphene-nickel matrix composites [J]. Mater Lett, 2018, 220: 178-181. |
| [5] | Kim H J, Shin D G, Kim D E. Frictional Behavior between Silicon and Steel Coated with Graphene Oxide in Dry Sliding and Water Lubrication Conditions [J]. Int J Pr Eng Man-Gt, 2016, 3 (1): 91-97. |
| [6] | Zhang Z H, Liu Z F, Lu J F et al. The sintering mechanism in spark plasma sintering - Proof of the occurrence of spark discharge [J]. Scripta Materialia, 2014, 81: 56-59. |
| [7] | Mu X N, Cai H N, Zhang H M et al. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite [J]. Materials & Design, 2018, 140: 431-441. |
| [8] | Kim Y, Lee J, Yeom M S et al. Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites [J]. Nat Commun, 2013, 4. |
| [9] | Borkar T, Sosa J, Hwang J Y et al. Laser-Deposited In Situ TiC-Reinforced Nickel Matrix Composites: 3D Microstructure and Tribological Properties [J]. Jom-Us, 2014, 66 (6): 935-942. |
| [10] | Mu X N, Zhang H M, Cai H N et al. Microstructure evolution and superior tensile properties of low content graphene nanoplatelets reinforced pure Ti matrix composites [J]. Materials Science and Engineering: A, 2017, 687: 164-174. |
| [11] | Huang H, Fan G, Tan Z et al. Superplastic behavior of carbon nanotube reinforced aluminum composites fabricated by flake powder metallurgy [J]. Materials Science and Engineering: A, 2017, 699: 55-61. |
| [12] | Liao J Z, Tan M J, Sridhar I. Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites [J]. Materials and Design, 2010, 31 (SUPPL. 1): S96-S100. |
| [13] | Jagannadham K. Thermal Conductivity Changes in Titanium-Graphene Composite upon Annealing [J]. Metall Mater Trans A, 2016, 47a (2): 907-915. |
| [14] | Zhao M, Xiong D-B, Tan Z et al. Lateral size effect of graphene on mechanical properties of aluminum matrix nanolaminated composites [J]. Scripta Materialia, 2017, 139: 44-48. |
| [15] | Gürbüz M, Mutuk T. Effect of process parameters on hardness and microstructure of graphene reinforced titanium composites [J]. Journal of Composite Materials, 2017, 52 (4): 543-551. |
APA Style
Xinlong Jiao, Zhifang Cheng, Hongmei Zhang, Zhenyu Wei, Luye Wei, et al. (2023). Effect of Heat Treatment on Mechanical Properties of Graphene Reinforced Titanium Matrix Composite Materials. American Journal of Energy Engineering, 11(2), 67-70. https://doi.org/10.11648/j.ajee.20231102.15
ACS Style
Xinlong Jiao; Zhifang Cheng; Hongmei Zhang; Zhenyu Wei; Luye Wei, et al. Effect of Heat Treatment on Mechanical Properties of Graphene Reinforced Titanium Matrix Composite Materials. Am. J. Energy Eng. 2023, 11(2), 67-70. doi: 10.11648/j.ajee.20231102.15
AMA Style
Xinlong Jiao, Zhifang Cheng, Hongmei Zhang, Zhenyu Wei, Luye Wei, et al. Effect of Heat Treatment on Mechanical Properties of Graphene Reinforced Titanium Matrix Composite Materials. Am J Energy Eng. 2023;11(2):67-70. doi: 10.11648/j.ajee.20231102.15
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajee.20231102.15,
author = {Xinlong Jiao and Zhifang Cheng and Hongmei Zhang and Zhenyu Wei and Luye Wei and Juntong Ren and Siwei Wang and Yongfan Li},
title = {Effect of Heat Treatment on Mechanical Properties of Graphene Reinforced Titanium Matrix Composite Materials},
journal = {American Journal of Energy Engineering},
volume = {11},
number = {2},
pages = {67-70},
doi = {10.11648/j.ajee.20231102.15},
url = {https://doi.org/10.11648/j.ajee.20231102.15},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.20231102.15},
abstract = {Graphene has a significant reinforcing effect. Titanium and titanium alloys have excellent properties such as high specific strength and good corrosion resistance compared to steel, and have broad application prospects in fields such as aerospace, automotive manufacturing, chemical engineering, and biomedical equipment. Graphene, as a new member of the carbon family, not only has excellent physical and mechanical properties, but also has a unique two-dimensional structure. This 2D structure has a higher specific surface area than CNT or graphite. Thus providing more contact area and interaction with the matrix material, these characteristics are very attractive for the research of composite materials. MLG/Flake Ti hybrid powder was prepared using high-energy ball milling, and then MLG/Flake Ti composite material was prepared through low-temperature high-pressure SPS preforming and high-temperature heat treatment (950°C). Perform high-temperature heat treatment at 950°C and set the insulation time to 10 minutes and 60 minutes respectively. After heat treatment, the hardness and yield strength of the material were significantly improved. After 10 minutes of heat treatment, the sample with 0.2wt% MLG added showed a yield strength of 2225MPa and an elongation of 30%, demonstrating a good match between strength and plasticity. Compared with the sample with only 0.1wt% MLG added, the strength improvement is nearly 60%. This indicates that the increase in MLG content has a significant strengthening effect.},
year = {2023}
}
TY - JOUR T1 - Effect of Heat Treatment on Mechanical Properties of Graphene Reinforced Titanium Matrix Composite Materials AU - Xinlong Jiao AU - Zhifang Cheng AU - Hongmei Zhang AU - Zhenyu Wei AU - Luye Wei AU - Juntong Ren AU - Siwei Wang AU - Yongfan Li Y1 - 2023/06/05 PY - 2023 N1 - https://doi.org/10.11648/j.ajee.20231102.15 DO - 10.11648/j.ajee.20231102.15 T2 - American Journal of Energy Engineering JF - American Journal of Energy Engineering JO - American Journal of Energy Engineering SP - 67 EP - 70 PB - Science Publishing Group SN - 2329-163X UR - https://doi.org/10.11648/j.ajee.20231102.15 AB - Graphene has a significant reinforcing effect. Titanium and titanium alloys have excellent properties such as high specific strength and good corrosion resistance compared to steel, and have broad application prospects in fields such as aerospace, automotive manufacturing, chemical engineering, and biomedical equipment. Graphene, as a new member of the carbon family, not only has excellent physical and mechanical properties, but also has a unique two-dimensional structure. This 2D structure has a higher specific surface area than CNT or graphite. Thus providing more contact area and interaction with the matrix material, these characteristics are very attractive for the research of composite materials. MLG/Flake Ti hybrid powder was prepared using high-energy ball milling, and then MLG/Flake Ti composite material was prepared through low-temperature high-pressure SPS preforming and high-temperature heat treatment (950°C). Perform high-temperature heat treatment at 950°C and set the insulation time to 10 minutes and 60 minutes respectively. After heat treatment, the hardness and yield strength of the material were significantly improved. After 10 minutes of heat treatment, the sample with 0.2wt% MLG added showed a yield strength of 2225MPa and an elongation of 30%, demonstrating a good match between strength and plasticity. Compared with the sample with only 0.1wt% MLG added, the strength improvement is nearly 60%. This indicates that the increase in MLG content has a significant strengthening effect. VL - 11 IS - 2 ER -
Email: